Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 2.85 mm nylon filament spool, matte finish

Taulman 3D

Taulman 3D Nylon Bridge 2.85 mm 1 lb Black 3D printers accessory

SKU CH-F6GT-PH0A7

Black nylon filament with 4800 PSI tensile strength and 248% elongation prints on glass with PVA glue while resisting warping better than standard nylon

  • ColorBlack
  • TypeFilament
  • Prints directly onto glass using PVA glue
  • Significantly stronger and more durable than PLA or ABS
  • Maintains nylon strength with reduced warping
  • Stronger bed adhesion prevents edge curling
  • Tensile strength 4800 PSI with 248% elongation

Taulman Nylon Bridge 2.85 mm Filament

Taulman Nylon Bridge is a black 2.85 mm filament supplied on a 1 lb spool. It is formulated to keep the high strength of nylon 645 while reducing warping and improving bed adhesion. The material prints directly onto glass when a thin layer of PVA glue is applied.

For printers accepting 2.85 mm nylon

This spool suits owners of fused-deposition printers that take 2.85 mm filament and want a tough nylon part without the severe curling of traditional grades. It is not suited for machines that only accept other diameters or for projects requiring water-soluble support structures.

Tensile strength 4800 PSI with 248 % elongation

The filament delivers a lab-certified tensile strength of 4800 PSI and stretches 248 % before breaking. Those figures confirm whether the material meets the mechanical demands of your functional prints.

Privalumai

  • Prints directly onto glass using PVA glue
  • Significantly stronger and more durable than PLA or ABS
  • Maintains nylon strength with reduced warping
  • Stronger bed adhesion prevents edge curling
  • Tensile strength 4800 PSI with 248% elongation

Specifikacijos

Brandtaulman3d
ColorBlack
TypeFilament

Klausimai apie šią prekę

Will the 2.85 mm Bridge filament feed reliably through my existing Bowden tube and extruder gear?

The 2.85 mm diameter matches the standard 3 mm class used by many Bowden and direct-drive systems, so it will feed through existing tubes and drive gears without hardware changes.

How can I confirm the first layer is adhering correctly on glass with PVA glue?

A smooth, uniform first layer with no lifted corners or curling edges shows the Bridge filament is bonding to the glue-coated glass as intended.

Does the 1 lb spool include PVA glue or any bed-adhesion sheets, or must I buy them separately?

The spool contains only the black Bridge filament; PVA glue stick and any additional bed surfaces are separate purchases.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.