暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 2.85 mm nylon filament spool, matte finish

Taulman 3D

Taulman 3D Nylon Bridge 2.85 mm 1 lb Black 3D printers accessory

SKU CH-F6GT-PH0A7

Black nylon filament with 4800 PSI tensile strength and 248% elongation prints on glass with PVA glue while resisting warping better than standard nylon

  • ColorBlack
  • TypeFilament
  • Prints directly onto glass using PVA glue
  • Significantly stronger and more durable than PLA or ABS
  • Maintains nylon strength with reduced warping
  • Stronger bed adhesion prevents edge curling
  • Tensile strength 4800 PSI with 248% elongation

Taulman Nylon Bridge 2.85 mm Filament

Taulman Nylon Bridge is a black 2.85 mm filament supplied on a 1 lb spool. It is formulated to keep the high strength of nylon 645 while reducing warping and improving bed adhesion. The material prints directly onto glass when a thin layer of PVA glue is applied.

For printers accepting 2.85 mm nylon

This spool suits owners of fused-deposition printers that take 2.85 mm filament and want a tough nylon part without the severe curling of traditional grades. It is not suited for machines that only accept other diameters or for projects requiring water-soluble support structures.

Tensile strength 4800 PSI with 248 % elongation

The filament delivers a lab-certified tensile strength of 4800 PSI and stretches 248 % before breaking. Those figures confirm whether the material meets the mechanical demands of your functional prints.

特長

  • Prints directly onto glass using PVA glue
  • Significantly stronger and more durable than PLA or ABS
  • Maintains nylon strength with reduced warping
  • Stronger bed adhesion prevents edge curling
  • Tensile strength 4800 PSI with 248% elongation

仕様

Brandtaulman3d
ColorBlack
TypeFilament

この商品に関する質問

Will the 2.85 mm Bridge filament feed reliably through my existing Bowden tube and extruder gear?

The 2.85 mm diameter matches the standard 3 mm class used by many Bowden and direct-drive systems, so it will feed through existing tubes and drive gears without hardware changes.

How can I confirm the first layer is adhering correctly on glass with PVA glue?

A smooth, uniform first layer with no lifted corners or curling edges shows the Bridge filament is bonding to the glue-coated glass as intended.

Does the 1 lb spool include PVA glue or any bed-adhesion sheets, or must I buy them separately?

The spool contains only the black Bridge filament; PVA glue stick and any additional bed surfaces are separate purchases.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。