Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 2.85 mm nylon filament spool, matte finish

Taulman 3D

Taulman 3D Nylon Bridge 2.85 mm 1 lb Black 3D printers accessory

SKU CH-F6GT-PH0A7

Black nylon filament with 4800 PSI tensile strength and 248% elongation prints on glass with PVA glue while resisting warping better than standard nylon

  • ColorBlack
  • TypeFilament
  • Prints directly onto glass using PVA glue
  • Significantly stronger and more durable than PLA or ABS
  • Maintains nylon strength with reduced warping
  • Stronger bed adhesion prevents edge curling
  • Tensile strength 4800 PSI with 248% elongation

Taulman Nylon Bridge 2.85 mm Filament

Taulman Nylon Bridge is a black 2.85 mm filament supplied on a 1 lb spool. It is formulated to keep the high strength of nylon 645 while reducing warping and improving bed adhesion. The material prints directly onto glass when a thin layer of PVA glue is applied.

For printers accepting 2.85 mm nylon

This spool suits owners of fused-deposition printers that take 2.85 mm filament and want a tough nylon part without the severe curling of traditional grades. It is not suited for machines that only accept other diameters or for projects requiring water-soluble support structures.

Tensile strength 4800 PSI with 248 % elongation

The filament delivers a lab-certified tensile strength of 4800 PSI and stretches 248 % before breaking. Those figures confirm whether the material meets the mechanical demands of your functional prints.

Pluspunten

  • Prints directly onto glass using PVA glue
  • Significantly stronger and more durable than PLA or ABS
  • Maintains nylon strength with reduced warping
  • Stronger bed adhesion prevents edge curling
  • Tensile strength 4800 PSI with 248% elongation

Specificaties

Brandtaulman3d
ColorBlack
TypeFilament

Vragen over dit artikel

Will the 2.85 mm Bridge filament feed reliably through my existing Bowden tube and extruder gear?

The 2.85 mm diameter matches the standard 3 mm class used by many Bowden and direct-drive systems, so it will feed through existing tubes and drive gears without hardware changes.

How can I confirm the first layer is adhering correctly on glass with PVA glue?

A smooth, uniform first layer with no lifted corners or curling edges shows the Bridge filament is bonding to the glue-coated glass as intended.

Does the 1 lb spool include PVA glue or any bed-adhesion sheets, or must I buy them separately?

The spool contains only the black Bridge filament; PVA glue stick and any additional bed surfaces are separate purchases.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.