Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black square thermal pad, 100 by 100 mm, 1.0 mm thick

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 100x100x1.0mm thermal pad

SKU CH-KA7Q-FPTPV

Electrically non-conductive thermal pad sized 100 x 100 mm at 1.0 mm thickness for SSDs, GPUs and other components

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Good thermal conductivity for SSDs and GPUs
  • Electrically non-conductive prevents short circuits
  • Easy-to-use 100x100x1.0mm pad size
  • Excellent price-performance ratio for cooling
  • Lower compressibility suits flat component gaps

Thermal Pad for SSDs and GPUs

This electrically non-conductive thermal pad measures 100 x 100 mm with a 1.0 mm thickness. It is designed to transfer heat from SSDs, GPU coolers, voltage regulators and memory modules. The pad provides good thermal conductivity and an excellent price-performance ratio.

Upgrading from Basic Thermal Pads

The Minus Pad Basic improves on earlier pads with higher thermal conductivity and easier handling. The jump is worth it when stock pads leave gaps or when component temperatures remain high under sustained loads. It replaces dried or torn pads during maintenance or cooler swaps.

Check Thickness and Surface Area

Verify that a 1.0 mm pad matches the gap between your component and heatsink. Confirm the 100 x 100 mm sheet covers the target dies or can be cut to fit smaller modules. Ensure the mating surfaces are clean and free of old compound before installation.

Privalumai

  • Good thermal conductivity for SSDs and GPUs
  • Electrically non-conductive prevents short circuits
  • Easy-to-use 100x100x1.0mm pad size
  • Excellent price-performance ratio for cooling
  • Lower compressibility suits flat component gaps

Specifikacijos

BrandThermal Grizzly
ModelTG-MP-A-100-100-10-2
Part NumberTG-MP-A-100-100-10-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Klausimai apie šią prekę

What size gap does the 1.0 mm pad fill on an SSD or GPU?

The pad is 1.0 mm thick and covers a 100 x 100 mm area, matching standard M.2 SSD and GPU VRAM footprints.

How do I install the pad without trapping air bubbles?

Peel the protective film, align the pad on the clean component, and press evenly from the centre outward so the slight compressibility spreads it flat.

When should I replace the thermal pad?

Replace it whenever you remount the cooler or if temperatures rise after prolonged heavy loads, since the material cannot be reused once compressed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.