Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black square thermal pad, 100 by 100 mm, 1.0 mm thick

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 100x100x1.0mm thermal pad

SKU CH-KA7Q-FPTPV

Electrically non-conductive thermal pad sized 100 x 100 mm at 1.0 mm thickness for SSDs, GPUs and other components

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Good thermal conductivity for SSDs and GPUs
  • Electrically non-conductive prevents short circuits
  • Easy-to-use 100x100x1.0mm pad size
  • Excellent price-performance ratio for cooling
  • Lower compressibility suits flat component gaps

Thermal Pad for SSDs and GPUs

This electrically non-conductive thermal pad measures 100 x 100 mm with a 1.0 mm thickness. It is designed to transfer heat from SSDs, GPU coolers, voltage regulators and memory modules. The pad provides good thermal conductivity and an excellent price-performance ratio.

Upgrading from Basic Thermal Pads

The Minus Pad Basic improves on earlier pads with higher thermal conductivity and easier handling. The jump is worth it when stock pads leave gaps or when component temperatures remain high under sustained loads. It replaces dried or torn pads during maintenance or cooler swaps.

Check Thickness and Surface Area

Verify that a 1.0 mm pad matches the gap between your component and heatsink. Confirm the 100 x 100 mm sheet covers the target dies or can be cut to fit smaller modules. Ensure the mating surfaces are clean and free of old compound before installation.

Přednosti

  • Good thermal conductivity for SSDs and GPUs
  • Electrically non-conductive prevents short circuits
  • Easy-to-use 100x100x1.0mm pad size
  • Excellent price-performance ratio for cooling
  • Lower compressibility suits flat component gaps

Specifikace

BrandThermal Grizzly
ModelTG-MP-A-100-100-10-2
Part NumberTG-MP-A-100-100-10-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Otázky k tomuto produktu

What size gap does the 1.0 mm pad fill on an SSD or GPU?

The pad is 1.0 mm thick and covers a 100 x 100 mm area, matching standard M.2 SSD and GPU VRAM footprints.

How do I install the pad without trapping air bubbles?

Peel the protective film, align the pad on the clean component, and press evenly from the centre outward so the slight compressibility spreads it flat.

When should I replace the thermal pad?

Replace it whenever you remount the cooler or if temperatures rise after prolonged heavy loads, since the material cannot be reused once compressed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.