Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black square thermal pad, 100 by 100 mm, 1.0 mm thick

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 100x100x1.0mm thermal pad

SKU CH-KA7Q-FPTPV

Electrically non-conductive thermal pad sized 100 x 100 mm at 1.0 mm thickness for SSDs, GPUs and other components

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Good thermal conductivity for SSDs and GPUs
  • Electrically non-conductive prevents short circuits
  • Easy-to-use 100x100x1.0mm pad size
  • Excellent price-performance ratio for cooling
  • Lower compressibility suits flat component gaps

Thermal Pad for SSDs and GPUs

This electrically non-conductive thermal pad measures 100 x 100 mm with a 1.0 mm thickness. It is designed to transfer heat from SSDs, GPU coolers, voltage regulators and memory modules. The pad provides good thermal conductivity and an excellent price-performance ratio.

Upgrading from Basic Thermal Pads

The Minus Pad Basic improves on earlier pads with higher thermal conductivity and easier handling. The jump is worth it when stock pads leave gaps or when component temperatures remain high under sustained loads. It replaces dried or torn pads during maintenance or cooler swaps.

Check Thickness and Surface Area

Verify that a 1.0 mm pad matches the gap between your component and heatsink. Confirm the 100 x 100 mm sheet covers the target dies or can be cut to fit smaller modules. Ensure the mating surfaces are clean and free of old compound before installation.

Priekšrocības

  • Good thermal conductivity for SSDs and GPUs
  • Electrically non-conductive prevents short circuits
  • Easy-to-use 100x100x1.0mm pad size
  • Excellent price-performance ratio for cooling
  • Lower compressibility suits flat component gaps

Specifikācijas

BrandThermal Grizzly
ModelTG-MP-A-100-100-10-2
Part NumberTG-MP-A-100-100-10-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Jautājumi par šo preci

What size gap does the 1.0 mm pad fill on an SSD or GPU?

The pad is 1.0 mm thick and covers a 100 x 100 mm area, matching standard M.2 SSD and GPU VRAM footprints.

How do I install the pad without trapping air bubbles?

Peel the protective film, align the pad on the clean component, and press evenly from the centre outward so the slight compressibility spreads it flat.

When should I replace the thermal pad?

Replace it whenever you remount the cooler or if temperatures rise after prolonged heavy loads, since the material cannot be reused once compressed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.