Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular metal box with wire terminals and DIN rail clips, matte grey finish

Tycon Systems

Tycon Systems TP-VRHP-2456 DC Voltage Converter 18-36V 56V 1.25A 70W

SKU CH-7YQV-AH8HZ

Industrial DC-to-DC converter steps 18-36V input to 56V at 1.25A with 70W output in a DIN-rail metal enclosure

  • TypeTycon Systems
  • High-output 56 VDC at 1.25 A delivers 70 W for industrial loads
  • Wide 18–36 VDC input range tolerates unstable supply voltages
  • Isolated input-to-output at 1500 VDC protects sensitive downstream equipment
  • Compact metal enclosure with DIN-rail mounting fits tight cabinet spaces
  • Full industrial protection: short-circuit, overvoltage and overload safeguards with 85 % efficiency

Industrial DC Converter for 56V Systems

The Tycon Systems TP-VRHP-2456 converts an 18 to 36VDC input into a regulated 56VDC output at 1.25A, delivering up to 70W in a compact metal enclosure. It is built for industrial environments that require isolated power conversion with DIN rail mounting flexibility.

Replaces Lower Voltage or Unisolated Supplies

This unit upgrades installations where a 56V load must be driven from a 24V nominal source without sharing a common ground. The jump is worth it when short circuit, overvoltage and overload protection are required alongside 1500VDC isolation and greater than 85% efficiency.

Handles 70W Continuous Loads in Harsh Conditions

It comfortably powers 56V equipment such as PoE injectors or radio gear across a 22°F to 149°F operating range and 0 to 90% humidity. Headroom runs out above 70W or outside the 18 to 36V input window, and the 12AWG terminal limit caps conductor size.

Privalumai

  • High-output 56 VDC at 1.25 A delivers 70 W for industrial loads
  • Wide 18–36 VDC input range tolerates unstable supply voltages
  • Isolated input-to-output at 1500 VDC protects sensitive downstream equipment
  • Compact metal enclosure with DIN-rail mounting fits tight cabinet spaces
  • Full industrial protection: short-circuit, overvoltage and overload safeguards with 85 % efficiency

Specifikacijos

TypeTycon Systems

Klausimai apie šią prekę

What wire gauge fits the terminal inputs and outputs?

The terminals accept up to 12AWG wire for both input and output connections.

How do I mount the converter on a DIN rail, and what step is often missed?

Attach the included DIN rail adapters to the metal enclosure, then snap the unit onto the rail; the step often missed is securing the adapters firmly before mounting.

What maintenance or replacement should I plan for this converter?

No user-serviceable parts are inside; if the unit fails, replace the entire converter as a single component.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.