Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular metal box with wire terminals and DIN rail clips, matte grey finish

Tycon Systems

Tycon Systems TP-VRHP-2456 DC Voltage Converter 18-36V 56V 1.25A 70W

SKU CH-7YQV-AH8HZ

Industrial DC-to-DC converter steps 18-36V input to 56V at 1.25A with 70W output in a DIN-rail metal enclosure

  • TypeTycon Systems
  • High-output 56 VDC at 1.25 A delivers 70 W for industrial loads
  • Wide 18–36 VDC input range tolerates unstable supply voltages
  • Isolated input-to-output at 1500 VDC protects sensitive downstream equipment
  • Compact metal enclosure with DIN-rail mounting fits tight cabinet spaces
  • Full industrial protection: short-circuit, overvoltage and overload safeguards with 85 % efficiency

Industrial DC Converter for 56V Systems

The Tycon Systems TP-VRHP-2456 converts an 18 to 36VDC input into a regulated 56VDC output at 1.25A, delivering up to 70W in a compact metal enclosure. It is built for industrial environments that require isolated power conversion with DIN rail mounting flexibility.

Replaces Lower Voltage or Unisolated Supplies

This unit upgrades installations where a 56V load must be driven from a 24V nominal source without sharing a common ground. The jump is worth it when short circuit, overvoltage and overload protection are required alongside 1500VDC isolation and greater than 85% efficiency.

Handles 70W Continuous Loads in Harsh Conditions

It comfortably powers 56V equipment such as PoE injectors or radio gear across a 22°F to 149°F operating range and 0 to 90% humidity. Headroom runs out above 70W or outside the 18 to 36V input window, and the 12AWG terminal limit caps conductor size.

Prednosti

  • High-output 56 VDC at 1.25 A delivers 70 W for industrial loads
  • Wide 18–36 VDC input range tolerates unstable supply voltages
  • Isolated input-to-output at 1500 VDC protects sensitive downstream equipment
  • Compact metal enclosure with DIN-rail mounting fits tight cabinet spaces
  • Full industrial protection: short-circuit, overvoltage and overload safeguards with 85 % efficiency

Špecifikácie

TypeTycon Systems

Otázky k tomuto produktu

What wire gauge fits the terminal inputs and outputs?

The terminals accept up to 12AWG wire for both input and output connections.

How do I mount the converter on a DIN rail, and what step is often missed?

Attach the included DIN rail adapters to the metal enclosure, then snap the unit onto the rail; the step often missed is securing the adapters firmly before mounting.

What maintenance or replacement should I plan for this converter?

No user-serviceable parts are inside; if the unit fails, replace the entire converter as a single component.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.