Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular metal box with wire terminals and DIN rail clips, matte grey finish

Tycon Systems

Tycon Systems TP-VRHP-2456 DC Voltage Converter 18-36V 56V 1.25A 70W

SKU CH-7YQV-AH8HZ

Industrial DC-to-DC converter steps 18-36V input to 56V at 1.25A with 70W output in a DIN-rail metal enclosure

  • TypeTycon Systems
  • High-output 56 VDC at 1.25 A delivers 70 W for industrial loads
  • Wide 18–36 VDC input range tolerates unstable supply voltages
  • Isolated input-to-output at 1500 VDC protects sensitive downstream equipment
  • Compact metal enclosure with DIN-rail mounting fits tight cabinet spaces
  • Full industrial protection: short-circuit, overvoltage and overload safeguards with 85 % efficiency

Industrial DC Converter for 56V Systems

The Tycon Systems TP-VRHP-2456 converts an 18 to 36VDC input into a regulated 56VDC output at 1.25A, delivering up to 70W in a compact metal enclosure. It is built for industrial environments that require isolated power conversion with DIN rail mounting flexibility.

Replaces Lower Voltage or Unisolated Supplies

This unit upgrades installations where a 56V load must be driven from a 24V nominal source without sharing a common ground. The jump is worth it when short circuit, overvoltage and overload protection are required alongside 1500VDC isolation and greater than 85% efficiency.

Handles 70W Continuous Loads in Harsh Conditions

It comfortably powers 56V equipment such as PoE injectors or radio gear across a 22°F to 149°F operating range and 0 to 90% humidity. Headroom runs out above 70W or outside the 18 to 36V input window, and the 12AWG terminal limit caps conductor size.

Přednosti

  • High-output 56 VDC at 1.25 A delivers 70 W for industrial loads
  • Wide 18–36 VDC input range tolerates unstable supply voltages
  • Isolated input-to-output at 1500 VDC protects sensitive downstream equipment
  • Compact metal enclosure with DIN-rail mounting fits tight cabinet spaces
  • Full industrial protection: short-circuit, overvoltage and overload safeguards with 85 % efficiency

Specifikace

TypeTycon Systems

Otázky k tomuto produktu

What wire gauge fits the terminal inputs and outputs?

The terminals accept up to 12AWG wire for both input and output connections.

How do I mount the converter on a DIN rail, and what step is often missed?

Attach the included DIN rail adapters to the metal enclosure, then snap the unit onto the rail; the step often missed is securing the adapters firmly before mounting.

What maintenance or replacement should I plan for this converter?

No user-serviceable parts are inside; if the unit fails, replace the entire converter as a single component.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.