Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small right-angled adapter with 29-pin SFF-8482 and 22-pin SATA connectors

Vszerda

Vszerda SAS to SATA Adapter SFF-8482 29Pin to 22Pin 90 Degree

SKU CH-H6TW-0609D

Connects a 29-pin SFF-8482 SAS drive to a 22-pin SATA port with a 90-degree angled connector

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

SAS-SATA adapter for hybrid controllers

This adapter connects a SAS drive with an SFF-8482 29-pin port to a SAS-compatible SATA controller. It also links SATA drives to SATA motherboards and SAS drives to SAS motherboards. Builders integrating mixed-interface storage into a system with a hybrid controller will find the physical connection solved by this part.

90-degree angled connector for tight routing

The right-angle design keeps the cable path short inside crowded chassis, reducing strain on the drive and motherboard ports during continuous operation. A compact 22-pin SATA side and 29-pin SAS side maintain signal integrity without extra bulk. No active circuitry means sustained throughput depends entirely on the host controller and drive capabilities.

SFF-8482 29-pin to 22-pin interface match

The single specification that decides fit is the exact port pairing: an SFF-8482 29-pin SAS drive connector to a 22-pin SATA controller header. It will not make a SAS drive work on a standard SATA-only motherboard, nor a SATA drive on a SAS-only backplane, unless the respective host or drive includes the necessary SAS chipset.

Privalumai

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Does the SFF-8482 29-pin connector draw extra power or run hot during all-day use?

The adapter is a passive 90-degree converter with no active components, so it adds no measurable heat or power draw beyond the drive itself.

What controller must my system already have for this SFF-8482 adapter to work?

You need a SAS-capable SATA controller or a motherboard with an onboard SAS chipset; a standard SATA-only controller will not recognise a SAS drive through this adapter.

Will this 22-pin to 29-pin adapter let me keep using my older SAS backplane with a new SATA-only HBA?

No, a SATA-only HBA lacks the SAS protocol layer, so the adapter cannot bridge a SAS backplane to that HBA.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.