Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small right-angled adapter with 29-pin SFF-8482 and 22-pin SATA connectors

Vszerda

Vszerda SAS to SATA Adapter SFF-8482 29Pin to 22Pin 90 Degree

SKU CH-H6TW-0609D

Connects a 29-pin SFF-8482 SAS drive to a 22-pin SATA port with a 90-degree angled connector

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

SAS-SATA adapter for hybrid controllers

This adapter connects a SAS drive with an SFF-8482 29-pin port to a SAS-compatible SATA controller. It also links SATA drives to SATA motherboards and SAS drives to SAS motherboards. Builders integrating mixed-interface storage into a system with a hybrid controller will find the physical connection solved by this part.

90-degree angled connector for tight routing

The right-angle design keeps the cable path short inside crowded chassis, reducing strain on the drive and motherboard ports during continuous operation. A compact 22-pin SATA side and 29-pin SAS side maintain signal integrity without extra bulk. No active circuitry means sustained throughput depends entirely on the host controller and drive capabilities.

SFF-8482 29-pin to 22-pin interface match

The single specification that decides fit is the exact port pairing: an SFF-8482 29-pin SAS drive connector to a 22-pin SATA controller header. It will not make a SAS drive work on a standard SATA-only motherboard, nor a SATA drive on a SAS-only backplane, unless the respective host or drive includes the necessary SAS chipset.

Helstu kostir

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Does the SFF-8482 29-pin connector draw extra power or run hot during all-day use?

The adapter is a passive 90-degree converter with no active components, so it adds no measurable heat or power draw beyond the drive itself.

What controller must my system already have for this SFF-8482 adapter to work?

You need a SAS-capable SATA controller or a motherboard with an onboard SAS chipset; a standard SATA-only controller will not recognise a SAS drive through this adapter.

Will this 22-pin to 29-pin adapter let me keep using my older SAS backplane with a new SATA-only HBA?

No, a SATA-only HBA lacks the SAS protocol layer, so the adapter cannot bridge a SAS backplane to that HBA.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.