Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Small right-angled adapter with 29-pin SFF-8482 and 22-pin SATA connectors

Vszerda

Vszerda SAS to SATA Adapter SFF-8482 29Pin to 22Pin 90 Degree

SKU CH-H6TW-0609D

Connects a 29-pin SFF-8482 SAS drive to a 22-pin SATA port with a 90-degree angled connector

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

SAS-SATA adapter for hybrid controllers

This adapter connects a SAS drive with an SFF-8482 29-pin port to a SAS-compatible SATA controller. It also links SATA drives to SATA motherboards and SAS drives to SAS motherboards. Builders integrating mixed-interface storage into a system with a hybrid controller will find the physical connection solved by this part.

90-degree angled connector for tight routing

The right-angle design keeps the cable path short inside crowded chassis, reducing strain on the drive and motherboard ports during continuous operation. A compact 22-pin SATA side and 29-pin SAS side maintain signal integrity without extra bulk. No active circuitry means sustained throughput depends entirely on the host controller and drive capabilities.

SFF-8482 29-pin to 22-pin interface match

The single specification that decides fit is the exact port pairing: an SFF-8482 29-pin SAS drive connector to a 22-pin SATA controller header. It will not make a SAS drive work on a standard SATA-only motherboard, nor a SATA drive on a SAS-only backplane, unless the respective host or drive includes the necessary SAS chipset.

Акценти

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

Спецификации

Все още няма публикувани спецификации за този артикул.

Въпроси за този артикул

Does the SFF-8482 29-pin connector draw extra power or run hot during all-day use?

The adapter is a passive 90-degree converter with no active components, so it adds no measurable heat or power draw beyond the drive itself.

What controller must my system already have for this SFF-8482 adapter to work?

You need a SAS-capable SATA controller or a motherboard with an onboard SAS chipset; a standard SATA-only controller will not recognise a SAS drive through this adapter.

Will this 22-pin to 29-pin adapter let me keep using my older SAS backplane with a new SATA-only HBA?

No, a SATA-only HBA lacks the SAS protocol layer, so the adapter cannot bridge a SAS backplane to that HBA.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.