نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small right-angled adapter with 29-pin SFF-8482 and 22-pin SATA connectors

Vszerda

Vszerda SAS to SATA Adapter SFF-8482 29Pin to 22Pin 90 Degree

SKU CH-H6TW-0609D

Connects a 29-pin SFF-8482 SAS drive to a 22-pin SATA port with a 90-degree angled connector

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

SAS-SATA adapter for hybrid controllers

This adapter connects a SAS drive with an SFF-8482 29-pin port to a SAS-compatible SATA controller. It also links SATA drives to SATA motherboards and SAS drives to SAS motherboards. Builders integrating mixed-interface storage into a system with a hybrid controller will find the physical connection solved by this part.

90-degree angled connector for tight routing

The right-angle design keeps the cable path short inside crowded chassis, reducing strain on the drive and motherboard ports during continuous operation. A compact 22-pin SATA side and 29-pin SAS side maintain signal integrity without extra bulk. No active circuitry means sustained throughput depends entirely on the host controller and drive capabilities.

SFF-8482 29-pin to 22-pin interface match

The single specification that decides fit is the exact port pairing: an SFF-8482 29-pin SAS drive connector to a 22-pin SATA controller header. It will not make a SAS drive work on a standard SATA-only motherboard, nor a SATA drive on a SAS-only backplane, unless the respective host or drive includes the necessary SAS chipset.

أبرز المميزات

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Right-angle 29-pin to 22-pin fits tight chassis
  • Links SATA drive to SATA motherboard directly
  • Links SAS drive to SAS motherboard directly
  • Requires SAS chipset on host for cross-protocol use

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Does the SFF-8482 29-pin connector draw extra power or run hot during all-day use?

The adapter is a passive 90-degree converter with no active components, so it adds no measurable heat or power draw beyond the drive itself.

What controller must my system already have for this SFF-8482 adapter to work?

You need a SAS-capable SATA controller or a motherboard with an onboard SAS chipset; a standard SATA-only controller will not recognise a SAS drive through this adapter.

Will this 22-pin to 29-pin adapter let me keep using my older SAS backplane with a new SATA-only HBA?

No, a SATA-only HBA lacks the SAS protocol layer, so the adapter cannot bridge a SAS backplane to that HBA.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.