Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
White 1.75mm PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro 1.75mm 1kg White 3D Printer Filament

SKU CH-MMSX-XP1BA

White PLA filament on a 1 kg spool with ±0.03 mm tolerance, vacuum-sealed for dry storage and smooth, low-shrinkage printing at 190–220 °C

  • ColorWhite
  • TypeFilament

Color White

  • Precise prints with ±0.03 mm tolerance
  • Filament stays dry in vacuum-sealed packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colours available for creative projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

Filament for FDM Printers

Ziro 3D PLA Pro is a 1.75mm white filament supplied on a 1kg spool. It suits owners of FDM printers such as Creality, Anycubic or Bambu machines that accept 1.75mm material. The PLA formulation prints at 190-220°C without a heated bed and produces no noticeable odour during use.

Vacuum Seal and Tangle-Free Spool

Each roll arrives vacuum sealed to keep the filament dry until opened. The spool is wound to a 100% tangle-free standard so filament feeds cleanly from the start. Dimensional tolerance is held to ±0.03mm, which helps maintain consistent line width across layers.

Straightforward Setup

Loading follows the normal 1.75mm procedure on compatible printers; no special hardware or firmware changes are required. The suggested print speed range is 30-90mm/s with an optional bed temperature of 50-60°C. Moisture uptake after opening and incorrect temperature settings are the most common causes of print quality issues.

Privalumai

  • Precise prints with ±0.03 mm tolerance
  • Filament stays dry in vacuum-sealed packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colours available for creative projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

Specifikacijos

ColorWhite
TypeFilament

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 1.75mm diameter stay within the ±0.03mm tolerance after months of storage?

The spool is vacuum-sealed with desiccant to keep the filament dry and dimensionally stable, preserving the stated tolerance over time.

What practical print-speed ceiling appears before quality drops on this PLA Pro?

The manufacturer suggests 30–90 mm/s; pushing beyond that range typically reduces layer adhesion and surface finish.

How much heat does the hot-end actually need all day at 220 °C with the bed at 60 °C?

Printing at the top of the 190–220 °C range with an optional 50–60 °C bed draws only the power your printer’s heater cartridge and bed require.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.