저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
White 1.75mm PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro 1.75mm 1kg White 3D Printer Filament

SKU CH-MMSX-XP1BA

White PLA filament on a 1 kg spool with ±0.03 mm tolerance, vacuum-sealed for dry storage and smooth, low-shrinkage printing at 190–220 °C

  • ColorWhite
  • TypeFilament

Color White

  • Precise prints with ±0.03 mm tolerance
  • Filament stays dry in vacuum-sealed packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colours available for creative projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

Filament for FDM Printers

Ziro 3D PLA Pro is a 1.75mm white filament supplied on a 1kg spool. It suits owners of FDM printers such as Creality, Anycubic or Bambu machines that accept 1.75mm material. The PLA formulation prints at 190-220°C without a heated bed and produces no noticeable odour during use.

Vacuum Seal and Tangle-Free Spool

Each roll arrives vacuum sealed to keep the filament dry until opened. The spool is wound to a 100% tangle-free standard so filament feeds cleanly from the start. Dimensional tolerance is held to ±0.03mm, which helps maintain consistent line width across layers.

Straightforward Setup

Loading follows the normal 1.75mm procedure on compatible printers; no special hardware or firmware changes are required. The suggested print speed range is 30-90mm/s with an optional bed temperature of 50-60°C. Moisture uptake after opening and incorrect temperature settings are the most common causes of print quality issues.

주요 특징

  • Precise prints with ±0.03 mm tolerance
  • Filament stays dry in vacuum-sealed packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colours available for creative projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

사양

ColorWhite
TypeFilament

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 1.75mm diameter stay within the ±0.03mm tolerance after months of storage?

The spool is vacuum-sealed with desiccant to keep the filament dry and dimensionally stable, preserving the stated tolerance over time.

What practical print-speed ceiling appears before quality drops on this PLA Pro?

The manufacturer suggests 30–90 mm/s; pushing beyond that range typically reduces layer adhesion and surface finish.

How much heat does the hot-end actually need all day at 220 °C with the bed at 60 °C?

Printing at the top of the 190–220 °C range with an optional 50–60 °C bed draws only the power your printer’s heater cartridge and bed require.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.