Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
White 1.75mm PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro 1.75mm 1kg White 3D Printer Filament

SKU CH-MMSX-XP1BA

White PLA filament on a 1 kg spool with ±0.03 mm tolerance, vacuum-sealed for dry storage and smooth, low-shrinkage printing at 190–220 °C

  • ColorWhite
  • TypeFilament

Color White

  • Precise prints with ±0.03 mm tolerance
  • Filament stays dry in vacuum-sealed packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colours available for creative projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

Filament for FDM Printers

Ziro 3D PLA Pro is a 1.75mm white filament supplied on a 1kg spool. It suits owners of FDM printers such as Creality, Anycubic or Bambu machines that accept 1.75mm material. The PLA formulation prints at 190-220°C without a heated bed and produces no noticeable odour during use.

Vacuum Seal and Tangle-Free Spool

Each roll arrives vacuum sealed to keep the filament dry until opened. The spool is wound to a 100% tangle-free standard so filament feeds cleanly from the start. Dimensional tolerance is held to ±0.03mm, which helps maintain consistent line width across layers.

Straightforward Setup

Loading follows the normal 1.75mm procedure on compatible printers; no special hardware or firmware changes are required. The suggested print speed range is 30-90mm/s with an optional bed temperature of 50-60°C. Moisture uptake after opening and incorrect temperature settings are the most common causes of print quality issues.

I korthet

  • Precise prints with ±0.03 mm tolerance
  • Filament stays dry in vacuum-sealed packaging
  • Smooth extrusion with low shrinkage and strong layer adhesion
  • 37 colours available for creative projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

Specifikationer

ColorWhite
TypeFilament

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 1.75mm diameter stay within the ±0.03mm tolerance after months of storage?

The spool is vacuum-sealed with desiccant to keep the filament dry and dimensionally stable, preserving the stated tolerance over time.

What practical print-speed ceiling appears before quality drops on this PLA Pro?

The manufacturer suggests 30–90 mm/s; pushing beyond that range typically reduces layer adhesion and surface finish.

How much heat does the hot-end actually need all day at 220 °C with the bed at 60 °C?

Printing at the top of the 190–220 °C range with an optional 50–60 °C bed draws only the power your printer’s heater cartridge and bed require.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.