Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60x38mm 12V 3.3A 4-pin ball bearing server fan

Zyvpee

Zyvpee PFR0612XHE-DB89 60mm 12V 3.3A 4-Pin Ball Bearing Case Fan

SKU CH-CASX-FTG07

60 mm by 38 mm ball-bearing case fan with 4-pin connector, 12 V and 3.3 A rating for HP DL380p G8 servers

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing design reduces wear for longer service life
  • 4-pin connector enables precise PWM speed control
  • 12 V 3.3 A rating delivers strong airflow for dense server chassis
  • 60 × 38 mm form factor fits HP DL380p G8 mounting points
  • Direct replacement for OEM part numbers 654577-002 and 662520-001

Server-grade 60 mm cooling

The Zyvpee PFR0612XHE-DB89 is a 60 mm by 38 mm case fan built for 12 V server environments. It draws 3.3 A through a four-pin connector and uses a ball bearing for continuous duty. The black non-LED frame matches rackmount aesthetics.

Replaces noisy 6038 units

This fan directly substitutes the original HP DL380p G8 coolers identified by part numbers 654577-002 and 662520-001. The upgrade is worth it when the existing 6038 fan develops bearing rattle or fails to spin at full speed. It restores the airflow curve the chassis was validated for.

Fits standard 60 mm mounts

The 60*38 mm footprint slides into any 60 mm bay with four-hole spacing. The four-wire PWM header lets the motherboard or BMC regulate speed without extra cabling. Ball-bearing construction frees the builder from sleeve-bearing wear in high-temperature server rooms.

Privalumai

  • Ball-bearing design reduces wear for longer service life
  • 4-pin connector enables precise PWM speed control
  • 12 V 3.3 A rating delivers strong airflow for dense server chassis
  • 60 × 38 mm form factor fits HP DL380p G8 mounting points
  • Direct replacement for OEM part numbers 654577-002 and 662520-001

Specifikacijos

Brand3ccooler.com
SeriesPFR0612XHE -DB89
ModelPFR0612XHE -DB89
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
Dimensions60*38mm

Klausimai apie šią prekę

Will the 60 mm by 38 mm frame fit the fan slots in an HP DL380p Gen8 server?

The 60 mm by 38 mm frame matches the original fan dimensions for the HP DL380p Gen8, so it slides into the same mounting holes without modification.

How do I connect the 4-pin connector correctly, and what is the common mistake?

Align the keyed 4-pin plug with the motherboard header and push straight in; the common mistake is forcing it in upside-down, which bends the pins.

When should the ball-bearing fan be replaced in a server running continuously?

Ball bearings typically last several years at 12 V 3.3 A continuous load; replace the fan if you hear increased noise, vibration, or if RPM drops below spec.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.