Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60x38mm 12V 3.3A 4-pin ball bearing server fan

Zyvpee

Zyvpee PFR0612XHE-DB89 60mm 12V 3.3A 4-Pin Ball Bearing Case Fan

SKU CH-CASX-FTG07

60 mm by 38 mm ball-bearing case fan with 4-pin connector, 12 V and 3.3 A rating for HP DL380p G8 servers

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing design reduces wear for longer service life
  • 4-pin connector enables precise PWM speed control
  • 12 V 3.3 A rating delivers strong airflow for dense server chassis
  • 60 × 38 mm form factor fits HP DL380p G8 mounting points
  • Direct replacement for OEM part numbers 654577-002 and 662520-001

Server-grade 60 mm cooling

The Zyvpee PFR0612XHE-DB89 is a 60 mm by 38 mm case fan built for 12 V server environments. It draws 3.3 A through a four-pin connector and uses a ball bearing for continuous duty. The black non-LED frame matches rackmount aesthetics.

Replaces noisy 6038 units

This fan directly substitutes the original HP DL380p G8 coolers identified by part numbers 654577-002 and 662520-001. The upgrade is worth it when the existing 6038 fan develops bearing rattle or fails to spin at full speed. It restores the airflow curve the chassis was validated for.

Fits standard 60 mm mounts

The 60*38 mm footprint slides into any 60 mm bay with four-hole spacing. The four-wire PWM header lets the motherboard or BMC regulate speed without extra cabling. Ball-bearing construction frees the builder from sleeve-bearing wear in high-temperature server rooms.

Puncte forte

  • Ball-bearing design reduces wear for longer service life
  • 4-pin connector enables precise PWM speed control
  • 12 V 3.3 A rating delivers strong airflow for dense server chassis
  • 60 × 38 mm form factor fits HP DL380p G8 mounting points
  • Direct replacement for OEM part numbers 654577-002 and 662520-001

Specificații

Brand3ccooler.com
SeriesPFR0612XHE -DB89
ModelPFR0612XHE -DB89
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
Dimensions60*38mm

Întrebări despre acest articol

Will the 60 mm by 38 mm frame fit the fan slots in an HP DL380p Gen8 server?

The 60 mm by 38 mm frame matches the original fan dimensions for the HP DL380p Gen8, so it slides into the same mounting holes without modification.

How do I connect the 4-pin connector correctly, and what is the common mistake?

Align the keyed 4-pin plug with the motherboard header and push straight in; the common mistake is forcing it in upside-down, which bends the pins.

When should the ball-bearing fan be replaced in a server running continuously?

Ball bearings typically last several years at 12 V 3.3 A continuous load; replace the fan if you hear increased noise, vibration, or if RPM drops below spec.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.