Fans
Fans TA450DC A34349-57G1 12cm 12025 24V 0.15A double ball bearing 3-wire case fan
19,99 USD
0.00025648BTC
Dostępny
Zyvpee
Zyvpee PFR0612XHE-DB89 60mm 12V 3.3A 4-Pin Ball Bearing Case Fan
60 mm by 38 mm ball-bearing case fan with 4-pin connector, 12 V and 3.3 A rating for HP DL380p G8 servers
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- Ball-bearing design reduces wear for longer service life
- 4-pin connector enables precise PWM speed control
- 12 V 3.3 A rating delivers strong airflow for dense server chassis
- 60 × 38 mm form factor fits HP DL380p G8 mounting points
- Direct replacement for OEM part numbers 654577-002 and 662520-001
Server-grade 60 mm cooling
The Zyvpee PFR0612XHE-DB89 is a 60 mm by 38 mm case fan built for 12 V server environments. It draws 3.3 A through a four-pin connector and uses a ball bearing for continuous duty. The black non-LED frame matches rackmount aesthetics.
Replaces noisy 6038 units
This fan directly substitutes the original HP DL380p G8 coolers identified by part numbers 654577-002 and 662520-001. The upgrade is worth it when the existing 6038 fan develops bearing rattle or fails to spin at full speed. It restores the airflow curve the chassis was validated for.
Fits standard 60 mm mounts
The 60*38 mm footprint slides into any 60 mm bay with four-hole spacing. The four-wire PWM header lets the motherboard or BMC regulate speed without extra cabling. Ball-bearing construction frees the builder from sleeve-bearing wear in high-temperature server rooms.
Najważniejsze cechy
- Ball-bearing design reduces wear for longer service life
- 4-pin connector enables precise PWM speed control
- 12 V 3.3 A rating delivers strong airflow for dense server chassis
- 60 × 38 mm form factor fits HP DL380p G8 mounting points
- Direct replacement for OEM part numbers 654577-002 and 662520-001
Specyfikacja
| Brand | 3ccooler.com |
|---|---|
| Series | PFR0612XHE -DB89 |
| Model | PFR0612XHE -DB89 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 60*38mm |
Pytania dotyczące tego produktu
Will the 60 mm by 38 mm frame fit the fan slots in an HP DL380p Gen8 server?
The 60 mm by 38 mm frame matches the original fan dimensions for the HP DL380p Gen8, so it slides into the same mounting holes without modification.
How do I connect the 4-pin connector correctly, and what is the common mistake?
Align the keyed 4-pin plug with the motherboard header and push straight in; the common mistake is forcing it in upside-down, which bends the pins.
When should the ball-bearing fan be replaced in a server running continuously?
Ball bearings typically last several years at 12 V 3.3 A continuous load; replace the fan if you hear increased noise, vibration, or if RPM drops below spec.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
