Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 60x38mm 12V 3.3A 4-pin ball bearing server fan

Zyvpee

Zyvpee PFR0612XHE-DB89 60mm 12V 3.3A 4-Pin Ball Bearing Case Fan

SKU CH-CASX-FTG07

60 mm by 38 mm ball-bearing case fan with 4-pin connector, 12 V and 3.3 A rating for HP DL380p G8 servers

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing design reduces wear for longer service life
  • 4-pin connector enables precise PWM speed control
  • 12 V 3.3 A rating delivers strong airflow for dense server chassis
  • 60 × 38 mm form factor fits HP DL380p G8 mounting points
  • Direct replacement for OEM part numbers 654577-002 and 662520-001

Server-grade 60 mm cooling

The Zyvpee PFR0612XHE-DB89 is a 60 mm by 38 mm case fan built for 12 V server environments. It draws 3.3 A through a four-pin connector and uses a ball bearing for continuous duty. The black non-LED frame matches rackmount aesthetics.

Replaces noisy 6038 units

This fan directly substitutes the original HP DL380p G8 coolers identified by part numbers 654577-002 and 662520-001. The upgrade is worth it when the existing 6038 fan develops bearing rattle or fails to spin at full speed. It restores the airflow curve the chassis was validated for.

Fits standard 60 mm mounts

The 60*38 mm footprint slides into any 60 mm bay with four-hole spacing. The four-wire PWM header lets the motherboard or BMC regulate speed without extra cabling. Ball-bearing construction frees the builder from sleeve-bearing wear in high-temperature server rooms.

Priekšrocības

  • Ball-bearing design reduces wear for longer service life
  • 4-pin connector enables precise PWM speed control
  • 12 V 3.3 A rating delivers strong airflow for dense server chassis
  • 60 × 38 mm form factor fits HP DL380p G8 mounting points
  • Direct replacement for OEM part numbers 654577-002 and 662520-001

Specifikācijas

Brand3ccooler.com
SeriesPFR0612XHE -DB89
ModelPFR0612XHE -DB89
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
Dimensions60*38mm

Jautājumi par šo preci

Will the 60 mm by 38 mm frame fit the fan slots in an HP DL380p Gen8 server?

The 60 mm by 38 mm frame matches the original fan dimensions for the HP DL380p Gen8, so it slides into the same mounting holes without modification.

How do I connect the 4-pin connector correctly, and what is the common mistake?

Align the keyed 4-pin plug with the motherboard header and push straight in; the common mistake is forcing it in upside-down, which bends the pins.

When should the ball-bearing fan be replaced in a server running continuously?

Ball bearings typically last several years at 12 V 3.3 A continuous load; replace the fan if you hear increased noise, vibration, or if RPM drops below spec.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.