Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board DDR4 memory module with black chips and gold edge connectors

A-Tech

A-Tech 4GB DDR4 2133 ECC UDIMM 1Rx8 Server Memory

SKU CH-4YJN-7702Y

4GB DDR4 2133 ECC UDIMM server memory with CL15 latency and 1.2V operation

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • DDR4 2133 MHz speed accelerates server responsiveness and multitasking
  • Low 1.20V voltage reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad platform compatibility
  • 288-pin UDIMM form factor fits standard server memory slots

4GB DDR4 2133 ECC UDIMM for Servers

This 4 GB DDR4 2133 module adds error-correcting memory to compatible servers and workstations. It runs at 1.20 V with a CL15 latency and uses a 1Rx8 unbuffered layout. The 288-pin DIMM fits standard DDR4 slots in systems that support ECC unbuffered memory.

DDR4 2133 speed and ECC limits

DDR4 2133 sets the maximum data rate at 2133 MT/s, so the module cannot run faster even if the platform supports higher speeds. ECC unbuffered memory requires a chipset and CPU that both enable error correction without registered buffering; consumer platforms typically disable this feature. The single-rank 1Rx8 organisation caps density per module at 4 GB.

Replaces Kingston KVR21E15S8/4

This A-Tech module is a direct replacement for the Kingston KVR21E15S8/4 part number. The upgrade is worthwhile when a system has empty DDR4 ECC UDIMM slots and the workload benefits from extra capacity or from replacing a failed stick. It is not suited for platforms that require registered or load-reduced DIMMs, nor for boards that only accept non-ECC memory.

Priekšrocības

  • ECC protection guards data integrity with built-in error correction
  • DDR4 2133 MHz speed accelerates server responsiveness and multitasking
  • Low 1.20V voltage reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad platform compatibility
  • 288-pin UDIMM form factor fits standard server memory slots

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR21E15S8/4
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesKVR21E15S8/4

Jautājumi par šo preci

Should I pick the 4GB 2133MHz CL15 module or a higher-capacity stick?

Choose the 4GB module when your server has limited DIMM slots and you only need a small capacity increase; add another identical 4GB stick later if the board supports dual-channel.

What does the 2133MHz rating deliver in a live server?

The module runs at 2133MHz with CL15 timing, giving a peak bandwidth of 17000 MB/s; actual throughput depends on your CPU memory controller and the number of populated channels.

Is the DDR4 288-pin ECC UDIMM interface compatible with registered DIMM slots?

No — this is an unbuffered ECC UDIMM (288-pin) and will not work in slots that require registered or load-reduced DIMMs; verify your motherboard accepts unbuffered ECC before buying.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.