A-Tech
A-Tech 4GB DDR4 2133 ECC UDIMM 1Rx8 Server Memory
4GB DDR4 2133 ECC UDIMM server memory with CL15 latency and 1.2V operation
- Capacity4GB
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnbuffered
- ECC protection guards data integrity with built-in error correction
- DDR4 2133 MHz speed accelerates server responsiveness and multitasking
- Low 1.20V voltage reduces power draw and heat output
- Single-rank 1Rx8 layout ensures broad platform compatibility
- 288-pin UDIMM form factor fits standard server memory slots
4GB DDR4 2133 ECC UDIMM for Servers
This 4 GB DDR4 2133 module adds error-correcting memory to compatible servers and workstations. It runs at 1.20 V with a CL15 latency and uses a 1Rx8 unbuffered layout. The 288-pin DIMM fits standard DDR4 slots in systems that support ECC unbuffered memory.
DDR4 2133 speed and ECC limits
DDR4 2133 sets the maximum data rate at 2133 MT/s, so the module cannot run faster even if the platform supports higher speeds. ECC unbuffered memory requires a chipset and CPU that both enable error correction without registered buffering; consumer platforms typically disable this feature. The single-rank 1Rx8 organisation caps density per module at 4 GB.
Replaces Kingston KVR21E15S8/4
This A-Tech module is a direct replacement for the Kingston KVR21E15S8/4 part number. The upgrade is worthwhile when a system has empty DDR4 ECC UDIMM slots and the workload benefits from extra capacity or from replacing a failed stick. It is not suited for platforms that require registered or load-reduced DIMMs, nor for boards that only accept non-ECC memory.
Poudarki
- ECC protection guards data integrity with built-in error correction
- DDR4 2133 MHz speed accelerates server responsiveness and multitasking
- Low 1.20V voltage reduces power draw and heat output
- Single-rank 1Rx8 layout ensures broad platform compatibility
- 288-pin UDIMM form factor fits standard server memory slots
Specifikacije
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KVR21E15S8/4 |
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | KVR21E15S8/4 |
Vprašanja o tem izdelku
Should I pick the 4GB 2133MHz CL15 module or a higher-capacity stick?
Choose the 4GB module when your server has limited DIMM slots and you only need a small capacity increase; add another identical 4GB stick later if the board supports dual-channel.
What does the 2133MHz rating deliver in a live server?
The module runs at 2133MHz with CL15 timing, giving a peak bandwidth of 17000 MB/s; actual throughput depends on your CPU memory controller and the number of populated channels.
Is the DDR4 288-pin ECC UDIMM interface compatible with registered DIMM slots?
No — this is an unbuffered ECC UDIMM (288-pin) and will not work in slots that require registered or load-reduced DIMMs; verify your motherboard accepts unbuffered ECC before buying.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



