Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green printed circuit board DDR4 memory module with black chips and gold edge connectors

A-Tech

A-Tech 4GB DDR4 2133 ECC UDIMM 1Rx8 Server Memory

SKU CH-4YJN-7702Y

4GB DDR4 2133 ECC UDIMM server memory with CL15 latency and 1.2V operation

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • DDR4 2133 MHz speed accelerates server responsiveness and multitasking
  • Low 1.20V voltage reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad platform compatibility
  • 288-pin UDIMM form factor fits standard server memory slots

4GB DDR4 2133 ECC UDIMM for Servers

This 4 GB DDR4 2133 module adds error-correcting memory to compatible servers and workstations. It runs at 1.20 V with a CL15 latency and uses a 1Rx8 unbuffered layout. The 288-pin DIMM fits standard DDR4 slots in systems that support ECC unbuffered memory.

DDR4 2133 speed and ECC limits

DDR4 2133 sets the maximum data rate at 2133 MT/s, so the module cannot run faster even if the platform supports higher speeds. ECC unbuffered memory requires a chipset and CPU that both enable error correction without registered buffering; consumer platforms typically disable this feature. The single-rank 1Rx8 organisation caps density per module at 4 GB.

Replaces Kingston KVR21E15S8/4

This A-Tech module is a direct replacement for the Kingston KVR21E15S8/4 part number. The upgrade is worthwhile when a system has empty DDR4 ECC UDIMM slots and the workload benefits from extra capacity or from replacing a failed stick. It is not suited for platforms that require registered or load-reduced DIMMs, nor for boards that only accept non-ECC memory.

Punti di forza

  • ECC protection guards data integrity with built-in error correction
  • DDR4 2133 MHz speed accelerates server responsiveness and multitasking
  • Low 1.20V voltage reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad platform compatibility
  • 288-pin UDIMM form factor fits standard server memory slots

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR21E15S8/4
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesKVR21E15S8/4

Domande su questo articolo

Should I pick the 4GB 2133MHz CL15 module or a higher-capacity stick?

Choose the 4GB module when your server has limited DIMM slots and you only need a small capacity increase; add another identical 4GB stick later if the board supports dual-channel.

What does the 2133MHz rating deliver in a live server?

The module runs at 2133MHz with CL15 timing, giving a peak bandwidth of 17000 MB/s; actual throughput depends on your CPU memory controller and the number of populated channels.

Is the DDR4 288-pin ECC UDIMM interface compatible with registered DIMM slots?

No — this is an unbuffered ECC UDIMM (288-pin) and will not work in slots that require registered or load-reduced DIMMs; verify your motherboard accepts unbuffered ECC before buying.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.