Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green printed circuit board DDR4 memory module with black chips and gold edge connectors

A-Tech

A-Tech 4GB DDR4 2133 ECC UDIMM 1Rx8 Server Memory

SKU CH-4YJN-7702Y

4GB DDR4 2133 ECC UDIMM server memory with CL15 latency and 1.2V operation

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • DDR4 2133 MHz speed accelerates server responsiveness and multitasking
  • Low 1.20V voltage reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad platform compatibility
  • 288-pin UDIMM form factor fits standard server memory slots

4GB DDR4 2133 ECC UDIMM for Servers

This 4 GB DDR4 2133 module adds error-correcting memory to compatible servers and workstations. It runs at 1.20 V with a CL15 latency and uses a 1Rx8 unbuffered layout. The 288-pin DIMM fits standard DDR4 slots in systems that support ECC unbuffered memory.

DDR4 2133 speed and ECC limits

DDR4 2133 sets the maximum data rate at 2133 MT/s, so the module cannot run faster even if the platform supports higher speeds. ECC unbuffered memory requires a chipset and CPU that both enable error correction without registered buffering; consumer platforms typically disable this feature. The single-rank 1Rx8 organisation caps density per module at 4 GB.

Replaces Kingston KVR21E15S8/4

This A-Tech module is a direct replacement for the Kingston KVR21E15S8/4 part number. The upgrade is worthwhile when a system has empty DDR4 ECC UDIMM slots and the workload benefits from extra capacity or from replacing a failed stick. It is not suited for platforms that require registered or load-reduced DIMMs, nor for boards that only accept non-ECC memory.

Puncte forte

  • ECC protection guards data integrity with built-in error correction
  • DDR4 2133 MHz speed accelerates server responsiveness and multitasking
  • Low 1.20V voltage reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad platform compatibility
  • 288-pin UDIMM form factor fits standard server memory slots

Specificații

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR21E15S8/4
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesKVR21E15S8/4

Întrebări despre acest articol

Should I pick the 4GB 2133MHz CL15 module or a higher-capacity stick?

Choose the 4GB module when your server has limited DIMM slots and you only need a small capacity increase; add another identical 4GB stick later if the board supports dual-channel.

What does the 2133MHz rating deliver in a live server?

The module runs at 2133MHz with CL15 timing, giving a peak bandwidth of 17000 MB/s; actual throughput depends on your CPU memory controller and the number of populated channels.

Is the DDR4 288-pin ECC UDIMM interface compatible with registered DIMM slots?

No — this is an unbuffered ECC UDIMM (288-pin) and will not work in slots that require registered or load-reduced DIMMs; verify your motherboard accepts unbuffered ECC before buying.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.