NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
8GB DDR4 2133MHz CL15 desktop memory module with 1.2V unbuffered DIMM design
This A-Tech module replaces the Mushkin MSL4U213FF8GX2 in desktop systems. It provides 8GB of DDR4 memory running at 2133MHz with CL15 latency and 1.20V operation. The unbuffered non-ECC DIMM suits everyday computing and multitasking workloads.
The stick uses the 288-pin DDR4 DIMM interface and a 2Rx8 organisation with major brand chips. It draws standard 1.2V power and requires no heat spreader to operate within specification. No extra cooling or voltage tuning is needed for the rated speed.
Every module undergoes quality assurance testing before shipment to verify dependable performance. The package contains the single 8GB DIMM only; no additional accessories or software are bundled. Compatibility should be confirmed against the motherboard specifications prior to installation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Mushkin |
| Model | MSL4U213FF8GX2 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | MSL4U213FF8GX2 |
| Recommend Use | Compatible Replacement for Mushkin MSL4U213FF8GX2 |
Yes, it uses the standard 288-pin DDR4 DIMM form factor used by virtually all desktop motherboards that support DDR4.
The module is rated at 2133 MHz; if your board only supports a lower speed it will downclock to the highest speed both the board and CPU memory controller allow.
1.2 V is the standard DDR4 voltage, so most boards apply it automatically; a BIOS update is only needed if your specific motherboard has a known compatibility issue with 8 GB density modules.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?