NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
8GB DDR4 2133MHz CL15 desktop memory module with 1.2V unbuffered DIMM design
This A-Tech module replaces the Mushkin MSL4U213FF8GX2 in desktop systems. It provides 8GB of DDR4 memory running at 2133MHz with CL15 latency and 1.20V operation. The unbuffered non-ECC DIMM suits everyday computing and multitasking workloads.
The stick uses the 288-pin DDR4 DIMM interface and a 2Rx8 organisation with major brand chips. It draws standard 1.2V power and requires no heat spreader to operate within specification. No extra cooling or voltage tuning is needed for the rated speed.
Every module undergoes quality assurance testing before shipment to verify dependable performance. The package contains the single 8GB DIMM only; no additional accessories or software are bundled. Compatibility should be confirmed against the motherboard specifications prior to installation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Mushkin |
| Model | MSL4U213FF8GX2 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | MSL4U213FF8GX2 |
| Recommend Use | Compatible Replacement for Mushkin MSL4U213FF8GX2 |
Yes, it uses the standard 288-pin DDR4 DIMM form factor used by virtually all desktop motherboards that support DDR4.
The module is rated at 2133 MHz; if your board only supports a lower speed it will downclock to the highest speed both the board and CPU memory controller allow.
1.2 V is the standard DDR4 voltage, so most boards apply it automatically; a BIOS update is only needed if your specific motherboard has a known compatibility issue with 8 GB density modules.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?