NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8GB DDR4 2133MHz CL15 desktop memory module with 1.2V unbuffered DIMM design
This A-Tech module replaces the Mushkin MSL4U213FF8GX2 in desktop systems. It provides 8GB of DDR4 memory running at 2133MHz with CL15 latency and 1.20V operation. The unbuffered non-ECC DIMM suits everyday computing and multitasking workloads.
The stick uses the 288-pin DDR4 DIMM interface and a 2Rx8 organisation with major brand chips. It draws standard 1.2V power and requires no heat spreader to operate within specification. No extra cooling or voltage tuning is needed for the rated speed.
Every module undergoes quality assurance testing before shipment to verify dependable performance. The package contains the single 8GB DIMM only; no additional accessories or software are bundled. Compatibility should be confirmed against the motherboard specifications prior to installation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Mushkin |
| Model | MSL4U213FF8GX2 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | MSL4U213FF8GX2 |
| Recommend Use | Compatible Replacement for Mushkin MSL4U213FF8GX2 |
Yes, it uses the standard 288-pin DDR4 DIMM form factor used by virtually all desktop motherboards that support DDR4.
The module is rated at 2133 MHz; if your board only supports a lower speed it will downclock to the highest speed both the board and CPU memory controller allow.
1.2 V is the standard DDR4 voltage, so most boards apply it automatically; a BIOS update is only needed if your specific motherboard has a known compatibility issue with 8 GB density modules.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?