A-Tech
A-Tech 8GB DDR4 2133MHz CL15 Desktop RAM
8GB DDR4 2133MHz CL15 desktop memory module with 1.2V unbuffered DIMM design
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 8GB capacity lets you run more programs at once
- DDR4 2133MHz speed moves data quickly through the system
- CL15 latency keeps response times low
- 2V operation matches standard DDR4 voltage
- 288-pin DIMM fits desktop motherboard slots
Compatible Desktop Upgrade
This A-Tech module replaces the Mushkin MSL4U213FF8GX2 in desktop systems. It provides 8GB of DDR4 memory running at 2133MHz with CL15 latency and 1.20V operation. The unbuffered non-ECC DIMM suits everyday computing and multitasking workloads.
Standard DDR4 Form Factor
The stick uses the 288-pin DDR4 DIMM interface and a 2Rx8 organisation with major brand chips. It draws standard 1.2V power and requires no heat spreader to operate within specification. No extra cooling or voltage tuning is needed for the rated speed.
Tested Reliability Focus
Every module undergoes quality assurance testing before shipment to verify dependable performance. The package contains the single 8GB DIMM only; no additional accessories or software are bundled. Compatibility should be confirmed against the motherboard specifications prior to installation.
Points forts
- 8GB capacity lets you run more programs at once
- DDR4 2133MHz speed moves data quickly through the system
- CL15 latency keeps response times low
- 2V operation matches standard DDR4 voltage
- 288-pin DIMM fits desktop motherboard slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Mushkin |
| Model | MSL4U213FF8GX2 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | MSL4U213FF8GX2 |
| Recommend Use | Compatible Replacement for Mushkin MSL4U213FF8GX2 |
Questions sur cet article
Will this module fit my desktop's DDR4 DIMM slots?
Yes, it uses the standard 288-pin DDR4 DIMM form factor used by virtually all desktop motherboards that support DDR4.
Does my motherboard need to support 2133 MHz or will it run slower automatically?
The module is rated at 2133 MHz; if your board only supports a lower speed it will downclock to the highest speed both the board and CPU memory controller allow.
Is any special voltage setting or BIOS update required to run this RAM at 1.2 V?
1.2 V is the standard DDR4 voltage, so most boards apply it automatically; a BIOS update is only needed if your specific motherboard has a known compatibility issue with 8 GB density modules.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



