Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips on both sides and gold edge connectors

A-Tech

A-Tech Supermicro Certified 16GB DDR4 2666MHz CL19 1.2V Non-ECC DIMM 288-Pin Desktop RAM

SKU CH-K3RD-6PBXE

Supermicro certified 16 GB DDR4 2666 MHz CL19 1.2 V unbuffered DIMM for compatible desktop systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • Supermicro certified for reliable system compatibility
  • 16 GB capacity enables smooth multitasking
  • DDR4 2666 MHz speed supports responsive performance
  • CL19 latency at 1.20 V balances speed and efficiency
  • 288-pin unbuffered DIMM fits standard desktop slots

Supermicro Certified 16GB DDR4 2666MHz DIMM

This module is a Supermicro certified 16GB DDR4 2666MHz CL19 1.2V non-ECC unbuffered DIMM built with Hynix chips. It carries the part number MEM-DR416L-HL01-UN26 and fits standard 288-pin desktop slots. The stick runs at PC4-21300 speed without a heat spreader.

Suited for Supermicro systems needing validated

It suits owners of compatible Supermicro platforms that require vendor-approved modules at this frequency and latency. Builders using motherboards that demand ECC, registered DIMMs, higher voltages or speeds beyond 2666MHz should select a different part.

Certification and testing replace generic

The Supermicro certification means the module has passed the vendor's qualification suite for the listed systems. Rigorous quality-assurance testing by A-Tech further reduces the risk of DOA or instability. No extra software or accessories are bundled with the memory stick.

Priekšrocības

  • Supermicro certified for reliable system compatibility
  • 16 GB capacity enables smooth multitasking
  • DDR4 2666 MHz speed supports responsive performance
  • CL19 latency at 1.20 V balances speed and efficiency
  • 288-pin unbuffered DIMM fits standard desktop slots

Specifikācijas

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-HL01-UN26
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR416L-HL01-UN26 (Hynix)
Recommend UseCompatible Supermicro Systems

Jautājumi par šo preci

Will this 288-pin DIMM fit my Supermicro motherboard?

The module is Supermicro Certified under part number MEM-DR416L-HL01-UN26, so it is validated for compatible Supermicro systems.

Does the CL19 timing at 2666 MHz require any BIOS changes?

It runs at the standard 1.20 V JEDEC voltage, so most boards will apply the correct speed and latency automatically.

Can I add this single 16 GB stick to my existing DDR4 memory?

Yes, it is a non-ECC unbuffered DDR4 2666 module; just confirm your board supports the total capacity and channel configuration you plan.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.