A-Tech
A-Tech Supermicro Certified 16GB DDR4 2666MHz CL19 1.2V Non-ECC DIMM 288-Pin Desktop RAM
Supermicro certified 16 GB DDR4 2666 MHz CL19 1.2 V unbuffered DIMM for compatible desktop systems
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- Tested Frequency2666
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- Supermicro certified for reliable system compatibility
- 16 GB capacity enables smooth multitasking
- DDR4 2666 MHz speed supports responsive performance
- CL19 latency at 1.20 V balances speed and efficiency
- 288-pin unbuffered DIMM fits standard desktop slots
Supermicro Certified 16GB DDR4 2666MHz DIMM
This module is a Supermicro certified 16GB DDR4 2666MHz CL19 1.2V non-ECC unbuffered DIMM built with Hynix chips. It carries the part number MEM-DR416L-HL01-UN26 and fits standard 288-pin desktop slots. The stick runs at PC4-21300 speed without a heat spreader.
Suited for Supermicro systems needing validated
It suits owners of compatible Supermicro platforms that require vendor-approved modules at this frequency and latency. Builders using motherboards that demand ECC, registered DIMMs, higher voltages or speeds beyond 2666MHz should select a different part.
Certification and testing replace generic
The Supermicro certification means the module has passed the vendor's qualification suite for the listed systems. Rigorous quality-assurance testing by A-Tech further reduces the risk of DOA or instability. No extra software or accessories are bundled with the memory stick.
Points forts
- Supermicro certified for reliable system compatibility
- 16 GB capacity enables smooth multitasking
- DDR4 2666 MHz speed supports responsive performance
- CL19 latency at 1.20 V balances speed and efficiency
- 288-pin unbuffered DIMM fits standard desktop slots
Caractéristiques
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR416L-HL01-UN26 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR416L-HL01-UN26 (Hynix) |
| Recommend Use | Compatible Supermicro Systems |
Questions sur cet article
Will this 288-pin DIMM fit my Supermicro motherboard?
The module is Supermicro Certified under part number MEM-DR416L-HL01-UN26, so it is validated for compatible Supermicro systems.
Does the CL19 timing at 2666 MHz require any BIOS changes?
It runs at the standard 1.20 V JEDEC voltage, so most boards will apply the correct speed and latency automatically.
Can I add this single 16 GB stick to my existing DDR4 memory?
Yes, it is a non-ECC unbuffered DDR4 2666 module; just confirm your board supports the total capacity and channel configuration you plan.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355238BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418741BTC
En stock