Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips on both sides and gold edge connectors

A-Tech

A-Tech Supermicro Certified 16GB DDR4 2666MHz CL19 1.2V Non-ECC DIMM 288-Pin Desktop RAM

SKU CH-K3RD-6PBXE

Supermicro certified 16 GB DDR4 2666 MHz CL19 1.2 V unbuffered DIMM for compatible desktop systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • Supermicro certified for reliable system compatibility
  • 16 GB capacity enables smooth multitasking
  • DDR4 2666 MHz speed supports responsive performance
  • CL19 latency at 1.20 V balances speed and efficiency
  • 288-pin unbuffered DIMM fits standard desktop slots

Supermicro Certified 16GB DDR4 2666MHz DIMM

This module is a Supermicro certified 16GB DDR4 2666MHz CL19 1.2V non-ECC unbuffered DIMM built with Hynix chips. It carries the part number MEM-DR416L-HL01-UN26 and fits standard 288-pin desktop slots. The stick runs at PC4-21300 speed without a heat spreader.

Suited for Supermicro systems needing validated

It suits owners of compatible Supermicro platforms that require vendor-approved modules at this frequency and latency. Builders using motherboards that demand ECC, registered DIMMs, higher voltages or speeds beyond 2666MHz should select a different part.

Certification and testing replace generic

The Supermicro certification means the module has passed the vendor's qualification suite for the listed systems. Rigorous quality-assurance testing by A-Tech further reduces the risk of DOA or instability. No extra software or accessories are bundled with the memory stick.

Přednosti

  • Supermicro certified for reliable system compatibility
  • 16 GB capacity enables smooth multitasking
  • DDR4 2666 MHz speed supports responsive performance
  • CL19 latency at 1.20 V balances speed and efficiency
  • 288-pin unbuffered DIMM fits standard desktop slots

Specifikace

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-HL01-UN26
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR416L-HL01-UN26 (Hynix)
Recommend UseCompatible Supermicro Systems

Otázky k tomuto produktu

Will this 288-pin DIMM fit my Supermicro motherboard?

The module is Supermicro Certified under part number MEM-DR416L-HL01-UN26, so it is validated for compatible Supermicro systems.

Does the CL19 timing at 2666 MHz require any BIOS changes?

It runs at the standard 1.20 V JEDEC voltage, so most boards will apply the correct speed and latency automatically.

Can I add this single 16 GB stick to my existing DDR4 memory?

Yes, it is a non-ECC unbuffered DDR4 2666 module; just confirm your board supports the total capacity and channel configuration you plan.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.