NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
Supermicro certified 16 GB DDR4 2666 MHz CL19 1.2 V unbuffered DIMM for compatible desktop systems
This module is a Supermicro certified 16GB DDR4 2666MHz CL19 1.2V non-ECC unbuffered DIMM built with Hynix chips. It carries the part number MEM-DR416L-HL01-UN26 and fits standard 288-pin desktop slots. The stick runs at PC4-21300 speed without a heat spreader.
It suits owners of compatible Supermicro platforms that require vendor-approved modules at this frequency and latency. Builders using motherboards that demand ECC, registered DIMMs, higher voltages or speeds beyond 2666MHz should select a different part.
The Supermicro certification means the module has passed the vendor's qualification suite for the listed systems. Rigorous quality-assurance testing by A-Tech further reduces the risk of DOA or instability. No extra software or accessories are bundled with the memory stick.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR416L-HL01-UN26 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR416L-HL01-UN26 (Hynix) |
| Recommend Use | Compatible Supermicro Systems |
The module is Supermicro Certified under part number MEM-DR416L-HL01-UN26, so it is validated for compatible Supermicro systems.
It runs at the standard 1.20 V JEDEC voltage, so most boards will apply the correct speed and latency automatically.
Yes, it is a non-ECC unbuffered DDR4 2666 module; just confirm your board supports the total capacity and channel configuration you plan.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?