Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Red G1/4 fitting for 10mm ID 16mm OD tubing

Bykski

Bykski B-FT3-TK 10mm ID 16mm OD Red DIY Cooling

SKU CH-PC2F-WP154 MPN B-FT3-TK

Connects 10 mm inner-diameter, 16 mm outer-diameter flexible tubing to G 1/4 thread ports in a non-aluminium loop

  • TypeCPU Block
  • ColorRed
  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Fitting for 10mm ID 16mm OD tubing

The Bykski B-FT3-TK is a G1/4 threaded fitting designed to connect 10mm inner diameter by 16mm outer diameter flexible tubing in a custom liquid-cooling loop. It is sold individually and finished in red for colour-coordinated builds.

Suits builders using 10/16mm soft tube

This fitting suits anyone assembling a loop with 10mm ID and 16mm OD flexible tubing and G1/4 ports. It is not for users of rigid tubing, different tube dimensions, or aluminium-based loops, which are explicitly excluded from compatibility.

Connects tube to G1/4 ports

Each fitting threads into a standard G1/4 port on blocks, radiators, reservoirs or pumps and secures the compatible flexible tube. It frees the builder from mismatched compression sizes and keeps the loop limited to non-aluminium components as specified.

Priekšrocības

  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Specifikācijas

TypeCPU Block
ColorRed

Jautājumi par šo preci

What thread size must my water-block or radiator port have to accept this fitting?

The fitting uses a G1/4 thread, so the component you are connecting it to must provide a matching G1/4 female port.

Can I use this red fitting in a loop that already contains aluminium radiators or blocks?

The product is marked for non-aluminium loops only; mixing it with aluminium parts risks galvanic corrosion.

How do I confirm the fitting is seated correctly after I push the tubing on?

Push the 10 mm ID × 16 mm OD tube fully over the barbs until it seats against the collar, then tighten the compression ring by hand plus a quarter turn with a spanner and pressure-test the loop for leaks.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.