Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Red G1/4 fitting for 10mm ID 16mm OD tubing

Bykski

Bykski B-FT3-TK 10mm ID 16mm OD Red DIY Cooling

SKU CH-PC2F-WP154 MPN B-FT3-TK

Connects 10 mm inner-diameter, 16 mm outer-diameter flexible tubing to G 1/4 thread ports in a non-aluminium loop

  • TypeCPU Block
  • ColorRed
  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Fitting for 10mm ID 16mm OD tubing

The Bykski B-FT3-TK is a G1/4 threaded fitting designed to connect 10mm inner diameter by 16mm outer diameter flexible tubing in a custom liquid-cooling loop. It is sold individually and finished in red for colour-coordinated builds.

Suits builders using 10/16mm soft tube

This fitting suits anyone assembling a loop with 10mm ID and 16mm OD flexible tubing and G1/4 ports. It is not for users of rigid tubing, different tube dimensions, or aluminium-based loops, which are explicitly excluded from compatibility.

Connects tube to G1/4 ports

Each fitting threads into a standard G1/4 port on blocks, radiators, reservoirs or pumps and secures the compatible flexible tube. It frees the builder from mismatched compression sizes and keeps the loop limited to non-aluminium components as specified.

Helstu kostir

  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Tæknilýsing

TypeCPU Block
ColorRed

Spurningar um þessa vöru

What thread size must my water-block or radiator port have to accept this fitting?

The fitting uses a G1/4 thread, so the component you are connecting it to must provide a matching G1/4 female port.

Can I use this red fitting in a loop that already contains aluminium radiators or blocks?

The product is marked for non-aluminium loops only; mixing it with aluminium parts risks galvanic corrosion.

How do I confirm the fitting is seated correctly after I push the tubing on?

Push the 10 mm ID × 16 mm OD tube fully over the barbs until it seats against the collar, then tighten the compression ring by hand plus a quarter turn with a spanner and pressure-test the loop for leaks.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.