我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Red G1/4 fitting for 10mm ID 16mm OD tubing

Bykski

Bykski B-FT3-TK 10mm ID 16mm OD Red DIY Cooling

SKU CH-PC2F-WP154 MPN B-FT3-TK

Connects 10 mm inner-diameter, 16 mm outer-diameter flexible tubing to G 1/4 thread ports in a non-aluminium loop

  • TypeCPU Block
  • ColorRed
  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Fitting for 10mm ID 16mm OD tubing

The Bykski B-FT3-TK is a G1/4 threaded fitting designed to connect 10mm inner diameter by 16mm outer diameter flexible tubing in a custom liquid-cooling loop. It is sold individually and finished in red for colour-coordinated builds.

Suits builders using 10/16mm soft tube

This fitting suits anyone assembling a loop with 10mm ID and 16mm OD flexible tubing and G1/4 ports. It is not for users of rigid tubing, different tube dimensions, or aluminium-based loops, which are explicitly excluded from compatibility.

Connects tube to G1/4 ports

Each fitting threads into a standard G1/4 port on blocks, radiators, reservoirs or pumps and secures the compatible flexible tube. It frees the builder from mismatched compression sizes and keeps the loop limited to non-aluminium components as specified.

商品特色

  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

商品規格

TypeCPU Block
ColorRed

商品問答

What thread size must my water-block or radiator port have to accept this fitting?

The fitting uses a G1/4 thread, so the component you are connecting it to must provide a matching G1/4 female port.

Can I use this red fitting in a loop that already contains aluminium radiators or blocks?

The product is marked for non-aluminium loops only; mixing it with aluminium parts risks galvanic corrosion.

How do I confirm the fitting is seated correctly after I push the tubing on?

Push the 10 mm ID × 16 mm OD tube fully over the barbs until it seats against the collar, then tighten the compression ring by hand plus a quarter turn with a spanner and pressure-test the loop for leaks.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。