Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Red G1/4 fitting for 10mm ID 16mm OD tubing

Bykski

Bykski B-FT3-TK 10mm ID 16mm OD Red DIY Cooling

SKU CH-PC2F-WP154 MPN B-FT3-TK

Connects 10 mm inner-diameter, 16 mm outer-diameter flexible tubing to G 1/4 thread ports in a non-aluminium loop

  • TypeCPU Block
  • ColorRed
  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Fitting for 10mm ID 16mm OD tubing

The Bykski B-FT3-TK is a G1/4 threaded fitting designed to connect 10mm inner diameter by 16mm outer diameter flexible tubing in a custom liquid-cooling loop. It is sold individually and finished in red for colour-coordinated builds.

Suits builders using 10/16mm soft tube

This fitting suits anyone assembling a loop with 10mm ID and 16mm OD flexible tubing and G1/4 ports. It is not for users of rigid tubing, different tube dimensions, or aluminium-based loops, which are explicitly excluded from compatibility.

Connects tube to G1/4 ports

Each fitting threads into a standard G1/4 port on blocks, radiators, reservoirs or pumps and secures the compatible flexible tube. It frees the builder from mismatched compression sizes and keeps the loop limited to non-aluminium components as specified.

I korthet

  • Secure G1/4 thread connection for 10mm ID x 16mm OD tubing
  • Red anodised finish adds colour accent to custom loop builds
  • Designed for non-aluminium liquid-cooling systems
  • Single fitting included for flexible tubing routing
  • Compact barb design simplifies DIY assembly and maintenance

Specifikationer

TypeCPU Block
ColorRed

Frågor om den här produkten

What thread size must my water-block or radiator port have to accept this fitting?

The fitting uses a G1/4 thread, so the component you are connecting it to must provide a matching G1/4 female port.

Can I use this red fitting in a loop that already contains aluminium radiators or blocks?

The product is marked for non-aluminium loops only; mixing it with aluminium parts risks galvanic corrosion.

How do I confirm the fitting is seated correctly after I push the tubing on?

Push the 10 mm ID × 16 mm OD tube fully over the barbs until it seats against the collar, then tighten the compression ring by hand plus a quarter turn with a spanner and pressure-test the loop for leaks.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.