SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501458BTC
Krājumā
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM HP 6200 Pro SFF/MT A69
An 8 GB DDR3 kit (2 × 4 GB) running at 1333 MHz CL9 1.5 V, validated for HP 6200 Pro SFF/MT desktops
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
- 1333 MHz DDR3 speed matches system specification for stable operation
- CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
- 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
- Two 4GB modules install directly into the four available memory sockets
HP 6200 Pro SFF/MT DDR3 Kit
This 8 GB kit contains two 4 GB unbuffered DIMMs built for HP Compaq Business Desktop 6200 Pro small-form-factor and mini-tower models. It targets owners of those systems who need a matched pair to populate the board's four slots up to the 16 GB maximum.
240-pin DIMM layout and 1.5 V operation
Each module uses a standard 240-pin DDR3 interface and runs at the JEDEC 1.5 V level, so it drops straight into the factory slots without voltage tweaks. The absence of a heat spreader keeps the profile low enough for the tight clearance inside the SFF chassis.
1333 MHz CL9 non-ECC specification
The kit is rated at DDR3 1333 (PC3 10600) with 9-9-9 timings and no error-correction circuitry, matching the platform's supported speed and latency. Systems that require registered or ECC memory cannot use these modules.
Priekšrocības
- 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
- 1333 MHz DDR3 speed matches system specification for stable operation
- CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
- 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
- Two 4GB modules install directly into the four available memory sockets
Specifikācijas
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Business Desktop 6200 Pro (Sff/Mt) |
| Package Content | 2 Memory RAM Sticks |
Jautājumi par šo preci
What DDR3 speed and PC rating does this kit run at?
The kit operates at DDR3 1333 MHz, which corresponds to the PC3 10600 standard.
Will these 240-pin DIMMs fit inside an HP 6200 Pro small-form-factor or micro-tower chassis?
Yes, the modules are 240-pin DDR3 DIMMs designed for the HP 6200 Pro SFF and MT models.
How do I install the two sticks correctly, and what is the common mistake to avoid?
Power off the PC, open the case, align each module's notch with the slot key, press down firmly until the retention clips click; the common mistake is not seating the stick fully so the clips do not engage.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
