我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR3 DIMM sticks, 240-pin, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM HP 6200 Pro SFF/MT A69

SKU CH-DR6G-2JKFA

An 8 GB DDR3 kit (2 × 4 GB) running at 1333 MHz CL9 1.5 V, validated for HP 6200 Pro SFF/MT desktops

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

HP 6200 Pro SFF/MT DDR3 Kit

This 8 GB kit contains two 4 GB unbuffered DIMMs built for HP Compaq Business Desktop 6200 Pro small-form-factor and mini-tower models. It targets owners of those systems who need a matched pair to populate the board's four slots up to the 16 GB maximum.

240-pin DIMM layout and 1.5 V operation

Each module uses a standard 240-pin DDR3 interface and runs at the JEDEC 1.5 V level, so it drops straight into the factory slots without voltage tweaks. The absence of a heat spreader keeps the profile low enough for the tight clearance inside the SFF chassis.

1333 MHz CL9 non-ECC specification

The kit is rated at DDR3 1333 (PC3 10600) with 9-9-9 timings and no error-correction circuitry, matching the platform's supported speed and latency. Systems that require registered or ECC memory cannot use these modules.

商品特色

  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

商品規格

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 6200 Pro (Sff/Mt)
Package Content2 Memory RAM Sticks

商品問答

What DDR3 speed and PC rating does this kit run at?

The kit operates at DDR3 1333 MHz, which corresponds to the PC3 10600 standard.

Will these 240-pin DIMMs fit inside an HP 6200 Pro small-form-factor or micro-tower chassis?

Yes, the modules are 240-pin DDR3 DIMMs designed for the HP 6200 Pro SFF and MT models.

How do I install the two sticks correctly, and what is the common mistake to avoid?

Power off the PC, open the case, align each module's notch with the slot key, press down firmly until the retention clips click; the common mistake is not seating the stick fully so the clips do not engage.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。