Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR3 DIMM sticks, 240-pin, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM HP 6200 Pro SFF/MT A69

SKU CH-DR6G-2JKFA

An 8 GB DDR3 kit (2 × 4 GB) running at 1333 MHz CL9 1.5 V, validated for HP 6200 Pro SFF/MT desktops

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

HP 6200 Pro SFF/MT DDR3 Kit

This 8 GB kit contains two 4 GB unbuffered DIMMs built for HP Compaq Business Desktop 6200 Pro small-form-factor and mini-tower models. It targets owners of those systems who need a matched pair to populate the board's four slots up to the 16 GB maximum.

240-pin DIMM layout and 1.5 V operation

Each module uses a standard 240-pin DDR3 interface and runs at the JEDEC 1.5 V level, so it drops straight into the factory slots without voltage tweaks. The absence of a heat spreader keeps the profile low enough for the tight clearance inside the SFF chassis.

1333 MHz CL9 non-ECC specification

The kit is rated at DDR3 1333 (PC3 10600) with 9-9-9 timings and no error-correction circuitry, matching the platform's supported speed and latency. Systems that require registered or ECC memory cannot use these modules.

Istaknuto

  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

Specifikacije

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 6200 Pro (Sff/Mt)
Package Content2 Memory RAM Sticks

Pitanja o ovom artiklu

What DDR3 speed and PC rating does this kit run at?

The kit operates at DDR3 1333 MHz, which corresponds to the PC3 10600 standard.

Will these 240-pin DIMMs fit inside an HP 6200 Pro small-form-factor or micro-tower chassis?

Yes, the modules are 240-pin DDR3 DIMMs designed for the HP 6200 Pro SFF and MT models.

How do I install the two sticks correctly, and what is the common mistake to avoid?

Power off the PC, open the case, align each module's notch with the slot key, press down firmly until the retention clips click; the common mistake is not seating the stick fully so the clips do not engage.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.