저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM HP 6200 Pro SFF/MT A69

SKU CH-DR6G-2JKFA

An 8 GB DDR3 kit (2 × 4 GB) running at 1333 MHz CL9 1.5 V, validated for HP 6200 Pro SFF/MT desktops

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

HP 6200 Pro SFF/MT DDR3 Kit

This 8 GB kit contains two 4 GB unbuffered DIMMs built for HP Compaq Business Desktop 6200 Pro small-form-factor and mini-tower models. It targets owners of those systems who need a matched pair to populate the board's four slots up to the 16 GB maximum.

240-pin DIMM layout and 1.5 V operation

Each module uses a standard 240-pin DDR3 interface and runs at the JEDEC 1.5 V level, so it drops straight into the factory slots without voltage tweaks. The absence of a heat spreader keeps the profile low enough for the tight clearance inside the SFF chassis.

1333 MHz CL9 non-ECC specification

The kit is rated at DDR3 1333 (PC3 10600) with 9-9-9 timings and no error-correction circuitry, matching the platform's supported speed and latency. Systems that require registered or ECC memory cannot use these modules.

주요 특징

  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

사양

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 6200 Pro (Sff/Mt)
Package Content2 Memory RAM Sticks

이 상품에 대한 질문

What DDR3 speed and PC rating does this kit run at?

The kit operates at DDR3 1333 MHz, which corresponds to the PC3 10600 standard.

Will these 240-pin DIMMs fit inside an HP 6200 Pro small-form-factor or micro-tower chassis?

Yes, the modules are 240-pin DDR3 DIMMs designed for the HP 6200 Pro SFF and MT models.

How do I install the two sticks correctly, and what is the common mistake to avoid?

Power off the PC, open the case, align each module's notch with the slot key, press down firmly until the retention clips click; the common mistake is not seating the stick fully so the clips do not engage.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.