Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small white syringe with grey cap and 2 g label

Corn Electronics

Corn Electronics MX-6 thermal paste 2 g

SKU CH-NX4W-YQ0TN

Thermal compound with 20 % lower resistance than MX-4, non-conductive and suited for direct-die GPU and console cooling

Weight 2 g

  • 20 % lower thermal resistance than MX-4 for better heat transfer
  • Non-conductive and non-capacitive formula removes short-circuit risk
  • Viscosity tuned for direct-die GPU and console applications
  • 2 g syringe covers multiple CPU or GPU installations
  • Over 20 years of cooling expertise behind the formulation

Compact 2 g syringe for CPUs and GPUs

This thermal compound comes in a 2 g syringe sized for single installations on desktop processors, graphics cards or console chips. The non-conductive, non-capacitive formula removes the risk of short circuits if paste spreads beyond the die. It is intended for builders who want a small, fresh portion without storing a larger tube.

Fits standard heatsink mounts and direct-die setups

The viscosity lets the paste spread evenly under a conventional cooler block or a bare-die GPU core without additional shims or spacers. Because it is electrically safe, no insulating barrier is required around exposed components. The small volume covers one typical CPU lid or GPU die with minimal waste.

20 % lower thermal resistance than MX-4

Independent composition changes give measurably better heat transfer for high-load scenarios such as sustained gaming or rendering. The 2 g portion handles one application cleanly but leaves no reserve for multiple rebuilds or large server heatsinks. Builders planning several installs will need additional syringes.

Priekšrocības

  • 20 % lower thermal resistance than MX-4 for better heat transfer
  • Non-conductive and non-capacitive formula removes short-circuit risk
  • Viscosity tuned for direct-die GPU and console applications
  • 2 g syringe covers multiple CPU or GPU installations
  • Over 20 years of cooling expertise behind the formulation

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the MX-6 paste dry out or lose effectiveness during continuous daily operation?

The manufacturer highlights long durability as a design focus for this compound.

How much heat does the MX-6 generate while the system runs all day?

Thermal paste is a passive material and does not generate heat or noise during operation.

Is a specific spreader tool or applicator required to use this 2 g syringe?

The paste is designed for easy application directly from the syringe onto CPU, GPU or console processors.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.