Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small white syringe with grey cap and 2 g label

Corn Electronics

Corn Electronics MX-6 thermal paste 2 g

SKU CH-NX4W-YQ0TN

Thermal compound with 20 % lower resistance than MX-4, non-conductive and suited for direct-die GPU and console cooling

Weight 2 g

  • 20 % lower thermal resistance than MX-4 for better heat transfer
  • Non-conductive and non-capacitive formula removes short-circuit risk
  • Viscosity tuned for direct-die GPU and console applications
  • 2 g syringe covers multiple CPU or GPU installations
  • Over 20 years of cooling expertise behind the formulation

Compact 2 g syringe for CPUs and GPUs

This thermal compound comes in a 2 g syringe sized for single installations on desktop processors, graphics cards or console chips. The non-conductive, non-capacitive formula removes the risk of short circuits if paste spreads beyond the die. It is intended for builders who want a small, fresh portion without storing a larger tube.

Fits standard heatsink mounts and direct-die setups

The viscosity lets the paste spread evenly under a conventional cooler block or a bare-die GPU core without additional shims or spacers. Because it is electrically safe, no insulating barrier is required around exposed components. The small volume covers one typical CPU lid or GPU die with minimal waste.

20 % lower thermal resistance than MX-4

Independent composition changes give measurably better heat transfer for high-load scenarios such as sustained gaming or rendering. The 2 g portion handles one application cleanly but leaves no reserve for multiple rebuilds or large server heatsinks. Builders planning several installs will need additional syringes.

Helstu kostir

  • 20 % lower thermal resistance than MX-4 for better heat transfer
  • Non-conductive and non-capacitive formula removes short-circuit risk
  • Viscosity tuned for direct-die GPU and console applications
  • 2 g syringe covers multiple CPU or GPU installations
  • Over 20 years of cooling expertise behind the formulation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

2 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the MX-6 paste dry out or lose effectiveness during continuous daily operation?

The manufacturer highlights long durability as a design focus for this compound.

How much heat does the MX-6 generate while the system runs all day?

Thermal paste is a passive material and does not generate heat or noise during operation.

Is a specific spreader tool or applicator required to use this 2 g syringe?

The paste is designed for easy application directly from the syringe onto CPU, GPU or console processors.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.