Corn Electronics Pixel Cube Blue E-ATX Mid Tower PC Case
- E-ATX Mid Tower Cha…
- Aluminum
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Corn Electronics
Gold aluminium E-ATX mid-tower with two 3.5" bays, one 2.5" bay, 420 mm GPU clearance, 180 mm cooler height, top three 140/120 mm fans, bottom two 140/three 120 mm fans, rear 120 mm fan, front USB-C.
Options Pixel Cube (Gold)
The Corn Electronics Pixel Cube Gold is an aluminium E-ATX mid-tower chassis designed for builders who want a compact frame that still accepts full-size components. It supports E-ATX and ATX motherboards and provides room for two 3.5-inch hard drives and one 2.5-inch solid-state drive. Front-panel connectivity includes a USB Type-C port, a USB 3.0 port and an audio jack.
The case offers flexible fan mounting with space for three 140 or 120 mm fans at the top, two 140 or three 120 mm fans at the bottom and a single 120 mm fan at the rear. This arrangement lets builders tune intake and exhaust paths for quiet operation or higher airflow depending on the hardware installed. Aluminium construction helps dissipate heat from the panel surfaces during normal use.
Under sustained load the chassis accommodates graphics cards up to 420 mm long and CPU coolers up to 180 mm tall, giving headroom for high-performance parts that run hot over long sessions. The generous GPU and cooler clearances mean thermal throttling is less likely during extended rendering or gaming workloads. Builders who need more than two 3.5-inch bays or additional 2.5-inch slots will need a different enclosure.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The chassis supports E-ATX and ATX boards; use the ATX standoff holes for standard ATX, and the extra E-ATX holes only if your board extends to them — mixing the two patterns is the common error.
Two 3.5-inch HDD bays and one 2.5-inch SSD bay are built in; the removable dust filters on the top, bottom and rear panels are the parts most likely to wear out and need swapping.
A card up to 420 mm fits, but installing a 140 mm bottom fan reduces usable length, so the bottom fan configuration is the first constraint you hit with long GPUs.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?