Corn Electronics Abee Pixel Cube for Pixel One PC Case Silver
- E-ATX Mid Tower Cha…
- Aluminum
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Corn Electronics
Blue aluminium E-ATX mid-tower case supporting 420 mm GPUs, 180 mm CPU coolers, two 3.5" drives, one 2.5" drive, front USB-C and USB 3.0, plus top, bottom and rear fan mounts
Options Pixel Cube (Blue)
The Corn Electronics Pixel Cube Blue is an E-ATX mid tower chassis constructed from aluminium. It accepts E-ATX and ATX motherboards and provides two internal 3.5-inch drive bays alongside one 2.5-inch bay. The front panel includes one USB Type-C port, one USB 3.0 port and one audio jack for convenient connectivity.
The case supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom and one 120 mm fan at the rear. This arrangement lets builders balance intake and exhaust for steady thermal performance during extended workloads rather than brief bursts. Aluminium construction helps dissipate heat from the chassis surfaces themselves.
Maximum graphics card length is capped at 420 mm and CPU cooler height at 180 mm, so longer cards or taller towers will not fit. The front I/O relies on a single USB 3.0 Type-C connection and one USB 3.0 Type-A connection, limiting simultaneous high-speed peripherals. Drive capacity is restricted to two 3.5-inch and one 2.5-inch device.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The top panel supports three 140 mm or three 120 mm fans, giving you up to three intake or exhaust points directly above the motherboard and CPU cooler.
You need a standard 24-pin ATX supply, an 8-pin EPS connector, plus internal USB 3.0, USB-C and HD-audio headers on the motherboard to activate the front ports.
The chassis allows 420 mm GPU length and 180 mm CPU cooler height, so both components at their maximum sizes can be installed simultaneously.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?