Corn Electronics Abee Pixel Cube for Pixel One PC Case Silver
- E-ATX Mid Tower Cha…
- Aluminum
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corn Electronics
Blue aluminium E-ATX mid-tower case supporting 420 mm GPUs, 180 mm CPU coolers, two 3.5" drives, one 2.5" drive, front USB-C and USB 3.0, plus top, bottom and rear fan mounts
Options Pixel Cube (Blue)
The Corn Electronics Pixel Cube Blue is an E-ATX mid tower chassis constructed from aluminium. It accepts E-ATX and ATX motherboards and provides two internal 3.5-inch drive bays alongside one 2.5-inch bay. The front panel includes one USB Type-C port, one USB 3.0 port and one audio jack for convenient connectivity.
The case supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom and one 120 mm fan at the rear. This arrangement lets builders balance intake and exhaust for steady thermal performance during extended workloads rather than brief bursts. Aluminium construction helps dissipate heat from the chassis surfaces themselves.
Maximum graphics card length is capped at 420 mm and CPU cooler height at 180 mm, so longer cards or taller towers will not fit. The front I/O relies on a single USB 3.0 Type-C connection and one USB 3.0 Type-A connection, limiting simultaneous high-speed peripherals. Drive capacity is restricted to two 3.5-inch and one 2.5-inch device.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The top panel supports three 140 mm or three 120 mm fans, giving you up to three intake or exhaust points directly above the motherboard and CPU cooler.
You need a standard 24-pin ATX supply, an 8-pin EPS connector, plus internal USB 3.0, USB-C and HD-audio headers on the motherboard to activate the front ports.
The chassis allows 420 mm GPU length and 180 mm CPU cooler height, so both components at their maximum sizes can be installed simultaneously.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?