Corn Electronics Abee Pixel Cube for Pixel One PC Case Silver
- E-ATX Mid Tower Cha…
- Aluminum
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Corn Electronics
Blue aluminium E-ATX mid-tower case supporting 420 mm GPUs, 180 mm CPU coolers, two 3.5" drives, one 2.5" drive, front USB-C and USB 3.0, plus top, bottom and rear fan mounts
Options Pixel Cube (Blue)
The Corn Electronics Pixel Cube Blue is an E-ATX mid tower chassis constructed from aluminium. It accepts E-ATX and ATX motherboards and provides two internal 3.5-inch drive bays alongside one 2.5-inch bay. The front panel includes one USB Type-C port, one USB 3.0 port and one audio jack for convenient connectivity.
The case supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom and one 120 mm fan at the rear. This arrangement lets builders balance intake and exhaust for steady thermal performance during extended workloads rather than brief bursts. Aluminium construction helps dissipate heat from the chassis surfaces themselves.
Maximum graphics card length is capped at 420 mm and CPU cooler height at 180 mm, so longer cards or taller towers will not fit. The front I/O relies on a single USB 3.0 Type-C connection and one USB 3.0 Type-A connection, limiting simultaneous high-speed peripherals. Drive capacity is restricted to two 3.5-inch and one 2.5-inch device.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The top panel supports three 140 mm or three 120 mm fans, giving you up to three intake or exhaust points directly above the motherboard and CPU cooler.
You need a standard 24-pin ATX supply, an 8-pin EPS connector, plus internal USB 3.0, USB-C and HD-audio headers on the motherboard to activate the front ports.
The chassis allows 420 mm GPU length and 180 mm CPU cooler height, so both components at their maximum sizes can be installed simultaneously.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?