Corn Electronics Abee Pixel Cube for Pixel One PC Case Silver
- E-ATX Mid Tower Cha…
- Aluminum
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Corn Electronics
Blue aluminium E-ATX mid-tower case supporting 420 mm GPUs, 180 mm CPU coolers, two 3.5" drives, one 2.5" drive, front USB-C and USB 3.0, plus top, bottom and rear fan mounts
Options Pixel Cube (Blue)
The Corn Electronics Pixel Cube Blue is an E-ATX mid tower chassis constructed from aluminium. It accepts E-ATX and ATX motherboards and provides two internal 3.5-inch drive bays alongside one 2.5-inch bay. The front panel includes one USB Type-C port, one USB 3.0 port and one audio jack for convenient connectivity.
The case supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom and one 120 mm fan at the rear. This arrangement lets builders balance intake and exhaust for steady thermal performance during extended workloads rather than brief bursts. Aluminium construction helps dissipate heat from the chassis surfaces themselves.
Maximum graphics card length is capped at 420 mm and CPU cooler height at 180 mm, so longer cards or taller towers will not fit. The front I/O relies on a single USB 3.0 Type-C connection and one USB 3.0 Type-A connection, limiting simultaneous high-speed peripherals. Drive capacity is restricted to two 3.5-inch and one 2.5-inch device.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The top panel supports three 140 mm or three 120 mm fans, giving you up to three intake or exhaust points directly above the motherboard and CPU cooler.
You need a standard 24-pin ATX supply, an 8-pin EPS connector, plus internal USB 3.0, USB-C and HD-audio headers on the motherboard to activate the front ports.
The chassis allows 420 mm GPU length and 180 mm CPU cooler height, so both components at their maximum sizes can be installed simultaneously.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;