Corn Electronics Abee Pixel Cube for Pixel One PC Case Silver
- E-ATX Mid Tower Cha…
- Aluminum
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Corn Electronics
Blue aluminium E-ATX mid-tower case supporting 420 mm GPUs, 180 mm CPU coolers, two 3.5" drives, one 2.5" drive, front USB-C and USB 3.0, plus top, bottom and rear fan mounts
Options Pixel Cube (Blue)
The Corn Electronics Pixel Cube Blue is an E-ATX mid tower chassis constructed from aluminium. It accepts E-ATX and ATX motherboards and provides two internal 3.5-inch drive bays alongside one 2.5-inch bay. The front panel includes one USB Type-C port, one USB 3.0 port and one audio jack for convenient connectivity.
The case supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom and one 120 mm fan at the rear. This arrangement lets builders balance intake and exhaust for steady thermal performance during extended workloads rather than brief bursts. Aluminium construction helps dissipate heat from the chassis surfaces themselves.
Maximum graphics card length is capped at 420 mm and CPU cooler height at 180 mm, so longer cards or taller towers will not fit. The front I/O relies on a single USB 3.0 Type-C connection and one USB 3.0 Type-A connection, limiting simultaneous high-speed peripherals. Drive capacity is restricted to two 3.5-inch and one 2.5-inch device.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
The top panel supports three 140 mm or three 120 mm fans, giving you up to three intake or exhaust points directly above the motherboard and CPU cooler.
You need a standard 24-pin ATX supply, an 8-pin EPS connector, plus internal USB 3.0, USB-C and HD-audio headers on the motherboard to activate the front ports.
The chassis allows 420 mm GPU length and 180 mm CPU cooler height, so both components at their maximum sizes can be installed simultaneously.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?