Corn Electronics Pixel Cube Blue E-ATX Mid Tower PC Case
- E-ATX Mid Tower Cha…
- Aluminum
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Corn Electronics
Gold aluminium E-ATX mid-tower with two 3.5" bays, one 2.5" bay, 420 mm GPU clearance, 180 mm cooler height, top three 140/120 mm fans, bottom two 140/three 120 mm fans, rear 120 mm fan, front USB-C.
Options Pixel Cube (Gold)
The Corn Electronics Pixel Cube Gold is an aluminium E-ATX mid-tower chassis designed for builders who want a compact frame that still accepts full-size components. It supports E-ATX and ATX motherboards and provides room for two 3.5-inch hard drives and one 2.5-inch solid-state drive. Front-panel connectivity includes a USB Type-C port, a USB 3.0 port and an audio jack.
The case offers flexible fan mounting with space for three 140 or 120 mm fans at the top, two 140 or three 120 mm fans at the bottom and a single 120 mm fan at the rear. This arrangement lets builders tune intake and exhaust paths for quiet operation or higher airflow depending on the hardware installed. Aluminium construction helps dissipate heat from the panel surfaces during normal use.
Under sustained load the chassis accommodates graphics cards up to 420 mm long and CPU coolers up to 180 mm tall, giving headroom for high-performance parts that run hot over long sessions. The generous GPU and cooler clearances mean thermal throttling is less likely during extended rendering or gaming workloads. Builders who need more than two 3.5-inch bays or additional 2.5-inch slots will need a different enclosure.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The chassis supports E-ATX and ATX boards; use the ATX standoff holes for standard ATX, and the extra E-ATX holes only if your board extends to them — mixing the two patterns is the common error.
Two 3.5-inch HDD bays and one 2.5-inch SSD bay are built in; the removable dust filters on the top, bottom and rear panels are the parts most likely to wear out and need swapping.
A card up to 420 mm fits, but installing a 140 mm bottom fan reduces usable length, so the bottom fan configuration is the first constraint you hit with long GPUs.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?