Corn Electronics Pixel Cube Blue E-ATX Mid Tower PC Case
- E-ATX Mid Tower Cha…
- Aluminum
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Corn Electronics
Gold aluminium E-ATX mid-tower with two 3.5" bays, one 2.5" bay, 420 mm GPU clearance, 180 mm cooler height, top three 140/120 mm fans, bottom two 140/three 120 mm fans, rear 120 mm fan, front USB-C.
Options Pixel Cube (Gold)
The Corn Electronics Pixel Cube Gold is an aluminium E-ATX mid-tower chassis designed for builders who want a compact frame that still accepts full-size components. It supports E-ATX and ATX motherboards and provides room for two 3.5-inch hard drives and one 2.5-inch solid-state drive. Front-panel connectivity includes a USB Type-C port, a USB 3.0 port and an audio jack.
The case offers flexible fan mounting with space for three 140 or 120 mm fans at the top, two 140 or three 120 mm fans at the bottom and a single 120 mm fan at the rear. This arrangement lets builders tune intake and exhaust paths for quiet operation or higher airflow depending on the hardware installed. Aluminium construction helps dissipate heat from the panel surfaces during normal use.
Under sustained load the chassis accommodates graphics cards up to 420 mm long and CPU coolers up to 180 mm tall, giving headroom for high-performance parts that run hot over long sessions. The generous GPU and cooler clearances mean thermal throttling is less likely during extended rendering or gaming workloads. Builders who need more than two 3.5-inch bays or additional 2.5-inch slots will need a different enclosure.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Case Material | Aluminum |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 180 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The chassis supports E-ATX and ATX boards; use the ATX standoff holes for standard ATX, and the extra E-ATX holes only if your board extends to them — mixing the two patterns is the common error.
Two 3.5-inch HDD bays and one 2.5-inch SSD bay are built in; the removable dust filters on the top, bottom and rear panels are the parts most likely to wear out and need swapping.
A card up to 420 mm fits, but installing a 140 mm bottom fan reduces usable length, so the bottom fan configuration is the first constraint you hit with long GPUs.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?